Ardesto IR-C2232 - Инструкция по эксплуатации - Страница 18

EN

18

highest temperatures. If the selected temperature is too low, water may 

drip onto the plate.

SETTING SHOT-STEAM AND STEAM WHEN IRONING VERTICALLY

Press the shot-steam button (F) to generate a powerful burst of steam that 
can penetrate the fabrics and smooth the most difficult and tough creases. 
Wait for a few seconds before pressing again 

[Fig. 4]

.

By pressing the shot-steam button at intervals you can also iron vertically 
(curtains, hung garments, etc.) 

[Fig. 5]

.

Warning:

the shot-steam function can only be used at high temperatures. 

Stop the emission when the plate temperature pilot light (G) comes on, than 
start ironing again only after the light has gone off.

DRY IRONING

To iron without steam, follow the instructions in section “steam ironing”, 
leaving the steam selector (D) on position «0FF».

SPRAY FUNCTION

Make sure that there is water in the reservoir. Press the spray button (E) 
slowly (for a dense spray) or quickly (for a vaporized spray) 

[Fig. 6]

.

Warning: for delicate fabrics, we recommend moistening the fabric 
beforehand using the spray function (E), or putting a damp cloth between 
the iron and the fabric. To avoid staining, do not use the spray on silk or 
synthetic fabrics.

CLEANING

Please note: before cleaning the iron in any way, make 

sure that the appliance plug is not connected to the 

socket.

Any deposits, starch residue or size left on the plate can 

be removed using a damp cloth or an unabrasive liquid 

detergent.

Avoid scratching the plate with steel wool or metallic 

objects.

The plastic parts can be cleaned with a damp cloth then 

wiped over with a dry cloth.