Philips PSG7024/20 - Инструкция по эксплуатации - Страница 7

9

2 

Remove the water tank and iron from the iron platform.

3 

Remove the EASY DECALC knob and empty the water through the EASY DECALC opening.

4 

Hold the appliance in the position that the EASY DECALC opening is facing up and pour 500ml 
water into the opening via a bottle or cup. (Fig. 20). 
Note: Do not fill the boiler with water under the running tap.

Note: Be mindful on the heavy weight of the appliance when you tilt it. 

Warning: Do not use perfumed water, water from the tumble dryer, vinegar, starch, descaling 

agents, ironing aids, chemically descaled water or other chemicals, as they may cause water 

spitting, brown staining or damage to your appliance.

5 

Keep the EASY DECALC opening facing up, reinsert the EASY DECALC knob and turn it clockwise to 
fasten it (Fig. 21).

6 

Put the appliance back on a stable and even surface. Fill up the water tank halfway. Switch on the 
appliance and wait for 5 minutes. 

7 

Keep the steam trigger pressed continuously while you iron a few pieces of thick cloth in a back-
and-forth motion for 3 minutes (Fig. 22).

Warning: Hot, dirty water (about 100-150 ml) comes out of the soleplate.

8 

Stop cleaning when no more water comes out of the soleplate.

9 

You can continue to use the appliance immediately. Otherwise unplug the appliance after the 
descaling is completed.

Storage

1 

Switch off the appliance and unplug it.
Note: it is recommended to empty the water tank after every use.

2 

Place the iron on the iron platform and lock it by pushing the carry lock release button (Fig. 23).

3 

Let the appliance cool down completely.

4 

Fold the supply hose and wind the supply hose inside the supply hose storage compartment 
(Fig. 24).

5 

Fold the mains cord and fasten it with the Velcro strip.

6 

You can carry the appliance with one hand by the handle of the iron when the iron is locked on the 
iron platform.

Troubleshooting

This chapter summarizes the most common problems you could encounter with the appliance. If you 
are unable to solve the problem with the information below, visit 

www.philips.com/support

 for a list 

of frequently asked questions or contact the Consumer Care Center in your country.

Problem 

Cause 

Solution

Dirty water, brown stains 
or white flakes come out 
of the soleplate.

Scale has built up inside the 
appliance because it has not been 
descaled regularly.

Descale the appliance and the 
soleplate (see chapter ‘Cleaning 
and maintenance’).

You have put chemicals or additives 
in the water tank. 

Never use chemical or additives 
with the appliance. If you have 
already done so, follow the 
procedure in chapter ‘Cleaning 
and maintenance’ to remove the 
chemicals.

English