Philips PSG7024/20 - Инструкция по эксплуатации - Страница 6

8

1 

Hold the iron in vertical position, press the steam trigger and touch the garment lightly with the 
soleplate and move the iron up and down (Fig. 13).

Safe rest

Resting the iron while rearranging your garment

While rearranging your garment, you can rest the iron either on the iron platform or horizontally on the 
ironing board (Fig. 6). The OptimalTEMP technology ensures the soleplate will not damage the ironing 
board cover.

Energy saving

Auto-shut off

-

To save energy, the appliance switches off automatically when it has not been used for 10 minutes. 
The auto-off light in the on/off button starts to flash.

-

To activate the appliance again, press the on/off button. The appliance then starts to heat up 
again.

Warning: Never leave the appliance unattended when it is connected to the mains. Always unplug 

the appliance after use.

Cleaning and maintenance

Descaling the appliance

It is very important to use the EASY DECALC function as soon as the ‘EASY DECALC’ light starts to flash 
(Fig. 14). 
The ‘EASY DECALC’ light flashes after about a month or 10 ironing sessions to indicate that the 
appliance needs to be descaled. Perform the following EASY DECALC procedure before you continue 
ironing. 

Note: If your water is hard, increase the descaling frequency. 

Warning: To avoid the risk of burns, unplug the appliance and let it cool down for at least two 

hours before you perform the EASY DECALC procedure (Fig. 15). 

1 

Remove the plug from the wall socket. 

2 

Remove the detachable water tank (Fig. 2).

3 

Remove the iron from the iron platform.

4 

Hold and shake the base of the steam generator (Fig. 16).

5 

Remove the EASY DECALC knob (Fig. 17). 

6 

Hold the base of the steam generator over the sink and empty it through the EASY DECALC 
opening (Fig. 18). 
Note: Be mindful on the heavy weight of the appliance when you tilt it.

7 

Reinsert the EASY DECALC knob and turn it clockwise to fasten it (Fig. 19). 

8 

You can continue using your iron immediately after completing the EASY DECALC procedure.

Descaling the soleplate

If you do not descale your appliance regularly, you may see brown stains coming out of the soleplate 
due to scale particles. Descale the soleplate by following the procedure below. We advise you to 
perform the procedure twice for better results.

1 

Make sure the appliance is cool and clean the soleplate with a damp cloth.

English