Philips GC9652 - Инструкция по эксплуатации - Страница 7

Problem

Possible cause

Solution

The iron leaves a 

shine or an 

imprint on the 

garment.

The surface to be ironed was 

uneven, for instance because 

you were ironing over a seam 

or a fold in the garment.

PerfectCare is safe on all garments. The 

shine or imprint is not permanent and will 

come off if you wash the garment. Avoid 

ironing over seams or folds or you can 

place a cotton cloth over the area to be 

ironed to avoid imprints at seams and folds.

The appliance 

does not produce 

any steam.

There is not enough water in 

the water tank (the ‘water tank 

empty’ light flashes).

Fill the water tank (see chapter ‘Using your 

appliance’, section ‘Filling the water tank’).

The appliance  is not hot 

enough to produce steam.

Wait until the ‘iron ready’ light on the iron 

lights up continuously.

You did not press the steam 

trigger.

Press the steam trigger and keep it pressed 

while you iron.

The water tank is not placed in 

the appliance properly.

Slide the water tank back into the appliance 

firmly  (‘click’).

The appliance is not switched 

on.

Inser t the plug in the wall socket and press 

the on/off button to switch on the 

appliance.

The appliance has 

switched  off. The 

light in the on/off 

button flashes.

The auto-off function is 

activated automatically when 

the appliance has not been 

used for more than 10 minutes.

Press the power on/off button to switch on 

the appliance again.

The appliance 

produces a 

pumping sound.

Water is pumped into the 

boiler inside the appliance. This 

is normal.

If the pumping sound continues nonstop, 

switch off the appliance and remove the 

plug from the wall socket. Contact an 

authorised Philips ser vice centre.

ENGLISH

9