Philips GC9652 - Инструкция по эксплуатации - Страница 6

 1 

 Remove the plug from the wall socket (Fig. 11).

 2 

 Place the appliance on the edge of the tabletop.

 3 

 Hold a cup (with a capacity of at least 350ml) under the EASY DE-CALC knob and turn the 

knob anticlockwise (Fig. 12).

 4 

 Remove the EASY DE-CALC knob and let the water with scale particles flow into the cup 

(Fig. 2).

 5 

 When no more water comes out of the appliance, reinsert the EASY DE-CALC knob and 

turn it clockwise to fasten it.  (Fig. 13)

Troubleshooting

This chapter summarises the most common problems you could encounter with the appliance.  

If you are unable to solve the problem with the information below, visit 

www.philips.com/support

for a list of frequently asked questions or contact the Consumer Care Centre in your country. 

Problem

Possible cause

Solution

The ironing board 

cover becomes 

wet or there are 

water droplets on 

the garment 

during ironing.

Steam has condensed on the 

ironing board cover after a long 

ironing session.

Replace the ironing board cover if the foam 

material has worn out. You can also add an 

extra layer of felt material under the ironing 

board cover to prevent condensation on 

the ironing board. You can buy felt in a 

fabric shop.

You have an ironing board 

cover that is not designed to 

cope with the high steam rate 

of the appliance.

Put an extra layer of felt material under the 

ironing board cover to prevent 

condensation on the ironing board. You can 

buy felt in a fabric shop.

Water droplets 

come out of the 

soleplate.

The steam that was still present 

in the hose has cooled down 

and condensed into water. This 

causes water droplets to come 

out of the soleplate.

Steam away from the garment for a few 

seconds.

Steam and/or 

water come out 

from under the 

EASY DE-CALC 

knob.

The EASY DE-CALC knob is 

not tightened properly.

Switch off the appliance and let the 

appliance cool down for 2 hours. Unscrew 

the EASY DE-CALC knob and screw it 

back onto the appliance properly. Note: 

Some water may escape when you remove 

the knob.

The rubber sealing ring of the 

EASY DE-CALC knob is worn.

Contact an authorised Philips ser vice 

centre for a new EASY DE-CALC knob.

Dir ty water and 

impurities come 

out of the 

soleplate or the 

soleplate is dir ty.

Impurities or chemicals present 

in the water have deposited in 

the steam vents and/or on the 

soleplate.

Clean the soleplate with a damp cloth.

Too much scale and minerals 

have accumulated inside the 

appliance.

Descale the appliance regularly  

(see chapter ‘Impor tant - DESCALING’).

ENGLISH

8