Philips GC8715 - Инструкция по эксплуатации - Страница 10

12

English

5 

During the Calc-Clean process, you hear short beeps and a pumping 
sound.

6 

Wait approximately 2 minutes for the appliance to complete the 
process. When the Calc-Clean process is completed, the iron stops 
beeping and the CALC-CLEAN light stops flashing.

7 

Wipe the iron with a piece of cloth and put it back on the base station.

Caution: The iron is hot.

8 

As the Calc-Clean container becomes hot during the Calc-Clean 
process, wait approx. 5 minutes before you touch it. Then carry the 
Calc-Clean container to the sink, empty it and store it for future use.

9 

If necessary, you can repeat steps 1 to 8. Make sure that you empty the 
Calc-Clean container before you start the Calc-Clean process.

Note: During the Calc-Clean process, clean water may come out of the 
soleplate if no scale has accumulated inside the iron. This is normal.

For more information on how to carry out the Calc-Clean process, refer to 
the videos in this link: http://www.philips.com/descaling-iron.

Cleaning the soleplate

To properly maintain your appliance, clean it regularly.

1 

Clean the appliance with a moist cloth.

2 

To easily and effectively remove stains, let the soleplate heat up and 
move the iron over a moist cloth.

Tip: Clean the soleplate regularly to ensure smooth gliding.

2 min.