Philips GC8510/02 - Инструкция по эксплуатации - Страница 7

 - If the mains cord or the supply hose is damaged, you must have it replaced by Philips, a ser vice 

centre authorised by Philips or similarly qualified persons in order to avoid a hazard. 

 - Never leave the appliance unattended when it is connected to the mains.

 - This appliance is not intended for use by persons (including children) with reduced physical, 

sensor y or mental capabilities, or lack of experience and knowledge, unless they have been given 

super vision or instruction concerning use of the appliance by a person responsible for their 

safety.

 - Children should be super vised to ensure that they do not play with the appliance.

 - Do not let the mains cord and supply hose come into contact with the hot soleplate of the iron.

 - If steam escapes from under the Calc-Clean rinsing cap when the appliance heats up, switch 

off the appliance and tighten the Calc-Clean rinsing cap. If steam continues to escape when the 

appliance heats up, switch off the appliance and contact a ser vice centre authorised by Philips.

 - Do not remove the Calc-Clean rinsing cap from the steam generator when the steam 

generator is still hot or under pressure. 

 - Do not use any other cap on the steam generator than the Calc-Clean rinsing cap that has been 

supplied with the appliance.

 - Do not put the switched-on iron on the heat-resistant iron resting mat for a long period of 

time. Only use the heat-resistant iron resting mat to put down the iron briefly during ironing.

Caution

 - Only connect the appliance to an ear thed wall socket.

 - Check the mains cord and the supply hose regularly for possible damage.

 - Always place and use the iron and the steam generator on a stable, level and horizontal surface.

 - Fully unwind the mains cord before you put the plug it in the wall socket.

 - The iron platform and the soleplate of the iron can become extremely hot and may cause burns 

if touched. If you want to move the steam generator, do not touch the iron platform.

 - When you have finished ironing, when you clean the appliance, when you fill or empty the 

steam generator and also when you leave the iron even for a shor t while: put the iron on the 

heat-resistant iron resting mat, switch off the appliance and remove the mains plug from the wall 

socket. 

 - Rinse the steam generator regularly according to the instructions in chapter ‘Cleaning and 

maintenance’.

 - This appliance is intended for household use only.

Electromagnetic fields (EMF)

This Philips appliance complies with all standards regarding electromagnetic fields (EMF). If handled 

properly and according to the instructions in this user manual, the appliance is safe to use based on 

scientific evidence available today.

using the appliance

steam ironing

  1 

 Place the steam generator on a stable and level surface, e.g. on the hard part of the ironing 

board or on a table.

  2 

 Make sure that there is enough water in the water tank (Fig. 4).

You can detach the water tank and fill it at any time during use. 

Fill the water tank before first use and as soon as the ‘water tank empty’ light flashes. 

Do not put hot water, perfume, vinegar, starch, descaling agents, ironing aids or other chemicals in 

the water tank.

Note: If the tap water in your area is very hard, we advise you to mix it with an equal amount of distilled 

water.

EnGlish

7