Philips GC8461/02 - Инструкция по эксплуатации - Страница 13

Problem

Possible cause

Solution

Water spots appear 

on the garment 

during use of 

the steam boost 

function.

The water spots on your garment are due 

to condensation in the supply hose. When 

the supply hose cooled down, the steam 

that was still present in the hose cooled 

down and condensed into water.

The water droplets stop coming 

out of the appliance when you have 

used the steam boost function for 

some time.

Flakes and 

impurities come 

out of the soleplate 

or the soleplate is 

dir ty.

Impurities or chemicals present in the 

water have deposited in the steam vents 

and/or on the soleplate.

Clean the soleplate with a damp 

cloth.

Too much scale and minerals have 

accumulated inside the steam generator.

Rinse the steam generator 

frequently (see chapter ‘Cleaning and 

maintenance’).

The steam supply 

hose is warm 

during ironing.

This is normal as steam passes through 

the steam supply hose during steam 

ironing.

Place the steam supply hose on the 

opposite side of the ironing board in 

such a way that your hand does not 

touch the hose during ironing.

I cannot put the 

iron on its heel.

The iron cannot be put on its heel 

because it has an ergonomic design that 

reduces strain on your wrist (see chapter 

‘Introduction’).

Place the iron horizontally on the 

heat-resistant iron resting mat.

GC8461/GC8460 

only: The cord is not 

wound completely 

when I press the 

cord rewind button

The cord jammed during rewinding.

Pull a small par t of the cord out of 

the appliance and press the cord 

rewind button again.

EnGlISh

13