Philips GC6360/02 - Инструкция по эксплуатации - Страница 6

6

General description (Fig. 1)

A

  Supply hose

B

  Temperature light

C

  Temperature dial

D

  Steam activator 

E

  Steam boost button (GC6360 only) 

F

  Steam tank cap

G

  Iron stand 

H

  Steam tank

I

  Mains cord

J

  Steam-ready light (GC6360 only)

K

  Steam tank switch with power-on light

L

  Steam control

M

  Iron switch with power-on light

N

  ’Steam tank empty’ light (GC6360 only)

O

  Soleplate

important

Read this user manual carefully before you use the appliance and save it for future reference.

Check if the voltage indicated on the type plate corresponds to the local mains voltage 

before you connect the appliance.

Only connect the appliance to an earthed wall socket.

Do not use the appliance if the plug, the cord, the supply hose or the appliance itself shows 

visible damage, or if the appliance has been dropped or leaks. 

Check the cord and the supply hose regularly for possible damage.

If the mains cord or the supply hose is damaged, you must have it replaced by Philips, a 

service centre authorised by Philips or similarly qualified persons in order to avoid a hazard. 

Never leave the appliance unattended when it is connected to the mains.

Never immerse the iron or the steam tank in water.

This appliance is not intended for use by persons (including children) with reduced physical, 

sensory or mental capabilities, or lack of experience and knowledge, unless they have been 

given supervision or instruction concerning use of the appliance by a person responsible for 

their safety.

Children should be supervised to ensure that they do not play with the appliance.

Always place and use the iron and the steam tank on a stable, level and horizontal surface. 

Do not put the steam tank on the soft part of the ironing board.

Only use this iron with the stand supplied.

Do not let the mains cord and supply hose come into contact with the soleplate when it is hot.

The iron stand and the soleplate of the iron can become extremely hot and may cause burns 

if touched. If you want to move the steam tank, do not touch the stand.

When you have finished ironing, when you clean the appliance, when you fill or empty the 

water tank and also when you leave the iron even for a short while: put the iron on the iron 

stand, set the iron switch and the steam tank switch to ‘off ’ and remove the mains plug from 

the wall socket. 

If steam escapes from under the steam tank cap when the appliance heats up, switch off the 

appliance and tighten the steam tank cap. If steam continues to escape when the 

appliance heats up, switch off the appliance and contact a service centre authorised by Philips.

Do not remove the cap from the steam tank when the steam tank is still hot. Follow the 

instructions given later in this manual.

Do not use any other cap on the steam tank than the cap that has been supplied with the 

appliance, as this cap also functions as a safety valve.

This appliance is intended for household use only.

,

,

,

,

,

,

,

,

,

,

,

,

,

,

,

,

,

,

EnGlish