Philips GC4885/30 - Инструкция по эксплуатации - Страница 7

ENGLISH

9

Troubleshooting

This chapter summarises the most common problems you could encounter with the 

appliance. If you are unable to solve the problem with the information below, visit  

www.philips.com/support

 for a list of frequently asked questions or contact the 

Consumer Care Centre in your country (see the worldwide guarantee leaflet for contact details).

Problem

Possible cause

Solution

Water leaks from 
the water filling 
door.

You have overfilled 
the water tank.

Do not fill the water tank beyond the 

MAX

indication. Pour excess water out of the 
water tank.

Water drips from 
the soleplate after 
the iron has been 
unplugged or has 
been stored.

The steam slider is set 
to 

MAX

 or 

ECO

.

Set the steam slider to dry setting.

You have put the iron 
in horizontal position 
with water still left in 
the water tank.

Empty the water tank.

Water or steam 
leaks from the 
back part of the 
iron.

You have not locked 
the Quick Calc 
Release tray properly.

Take out the Quick Calc Release tray and 
clean it using tap water. Use a piece of 
cloth to wipe off  calc in the opening of 
the back part of the iron. Put back the tray 
and lock it. (See chapter  ‘Cleaning and 
maintenance’, section  ‘Quick calc release 
function’).

The Quick Calc 
Release tray is 
damaged.

Contact a consumer care center in your 
country (see the world wide guarantee 
leaflet for contact details).

The steam boost 
function does 
not work properly 
(water leaks out of 
the soleplate).

You have used the 
steam boost function 
too often within a 
very short period.

Wait for a few seconds before you use the 
steam boost function again.

You have used 
the steam boost 
function at too low a 
temperature.

Set an ironing temperature at which 
the steam boost function can be used 
(

●●●

to 

MAX

).

Flakes and 
impurities 
come out of the 
soleplate during 
ironing.

Calc are formed 
inside the soleplate.

Use the Calc-clean function (see chapter 
‘Cleaning and maintenance’, section ‘Calc-
clean function’).

9