Philips GC4885/30 - Инструкция по эксплуатации - Страница 5

ENGLISH

7

Steam setting

-

MAX

: This setting gives out highest steam output to provide the best ironing results 

on thicker garments.

-

ECO

: This steam setting enables you to save energy, reduce steam output and still 

have sufficient steam to iron your garments.

-

Dry

: This steam setting enables you to iron without steam or to stop steam when the 

iron is not in use.

-

Iron with extra steam

: Press and hold the steam boost trigger to get more steam to 

remove stubborn creases.

Steam boost function and vertical steaming

-

Press and release the steam boost trigger for a powerful boost steam. This can be 

used to remove targeted stubborn creases or creases from a hanged garment. 

Note: The steam boost function should only be used at temperature setting between 

●●●

 to MAX. Leaking may appear if you use steam boost at too low a temperature.

Hot steam comes out of the iron. Do not remove wrinkles from a garment while some 

one is wearing it. To prevent burns, do not direct the steam at people.

Safety auto-off (specific types only) 

The safety auto-off function automatically switches off the iron if it has not been used 

for 30 seconds resting on its soleplate or 8 minutes resting on its backplate. The auto-off 

light will light up.

-

To let the iron heat up again, pick up the iron or move it slightly. The auto-off light 

goes out.

Cleaning and maintenance

For figures, refer to the fold-out at the back of the user manual.

Cleaning

 1 

 Unplug the iron and let it cool down.

 2 

 Pour any remaining water out of the water tank from the water filling door. 

 3 

  Wipe flakes and any other deposit off the soleplate with a damp cloth and a non-

abrasive (liquid) cleaning agent.

To keep the soleplate smooth, avoid hard contact with metal objects. Never use a 

scouring pad, vinegar or other chemicals to clean the soleplate.

Quick Calc Release

IMPORTANT: To prolong the life time of your appliance and to maintain good 

steaming performance, use Quick Calc Release function once every 1 month. If water 

in your area is very hard, use this function more frequently. 

Note: Make sure that the iron has been unplugged for at least 1 hour and has 

completely cooled down, before you use Quick Calc Release.