Philips GC3593/02 - Инструкция по эксплуатации - Страница 9

 3 

 Put the mains plug in an earthed wall socket.

,

The amber temperature light goes on (Fig. 6).

 4 

 When the temperature light goes out, wait a while before you 

start ironing.

The temperature light goes on from time to time during ironing.

Using the appliance 

Note: The iron may give off some smoke when you use it for the first time. 

This stops after a short while.

Steam ironing

 1 

 Make sure that there is enough water in the water tank.

 2 

 Set the recommended ironing temperature (see chapter  

‘Preparing for use’, section ‘Setting the temperature’). 

 3 

 Set the appropriate steam setting. Make sure that the steam 

setting is suitable for the set ironing temperature: (Fig. 7)

 - 1 - 2 for moderate steam (temperature settings 

2

 to 

3

) 

 - 3 - 4 for maximum steam (temperature settings 

3

 to MAX) 

Note: The iron starts to produce steam as soon as it has reached the 

set temperature.

Note: If the selected ironing temperature is too low (MIN to 

2

), water may 

drip from the soleplate (see chapter ‘Features’, section ‘Drip stop’). 

Ironing without steam

 1 

 Set the steam control to position 0 (= no steam) (Fig. 3).

 2 

 Set the recommended ironing temperature (see chapter  

‘Preparing for use’, section ‘Setting the temperature’). 

ENGLISH

9

4239_000_8219_2_DFU Booklet_A6_v1.indd   9

18/07/14   14:06