Philips GC3593/02 - Инструкция по эксплуатации - Страница 14

Problem

Possible cause

Solution

The iron is 

plugged in, but 

the soleplate 

stays cold.

There is a 

connection 

problem.

Check the mains cord, the plug 

and the wall socket.

The temperature 

dial is set to MIN.

Set the temperature dial to the 

required position

The iron does 

not produce 

any steam.

There is not 

enough water in 

the water tank.

Fill the water tank (see chapter 

‘Preparing for use’, section 

‘Filling the water tank).

The steam 

control is set to 

position 0.

Set the steam control to a 

position between 1 and 4 (see 

chapter ‘Using the appliance’, 

section ‘Steam  ironing’).

The iron is not 

hot enough and/

or the drip-stop 

function has been 

activated (specific 

types only).

Set an ironing temperature that  

is suitable for steam ironing  

( 

2

 to MAX). Put the iron on 

its heel and wait until the amber 

temperature light goes out 

before you star t ironing.

Water 

droplets drip 

onto the fabric 

during ironing.

The temperature 

dial has been set 

to a temperature 

that is too low for 

steam ironing.

Set an ironing temperature that is 

suitable for steam ironing 

(temperature settings 

2

 to 

MAX). Put the iron on its heel 

and wait until the amber 

temperature light goes out.

You have put an 

additive in the 

water tank.

Rinse the water tank and do not 

put any additive in the water tank.

ENGLISH

14

4239_000_8219_2_DFU Booklet_A6_v1.indd   14

18/07/14   14:06