Philips GC2860/02 - Инструкция по эксплуатации - Страница 11

  1 

 Press and release the steam boost button (Fig. 6).

Vertical shot of steam

You can also use the steam boost function when you hold the iron in 

ver tical position. This is useful for removing creases from hanging clothes, 

cur tains etc.

  1 

 Hold the iron in vertical position and press and release the steam 

boost button (Fig. 7).

Never direct the steam at people.

Drip stop

This iron is equipped with a drip-stop function: the iron automatically 

stops producing steam when the temperature is too low to prevent 

water from dripping out of the soleplate. When this happens you hear a 

click sound. 

automatic shut-off function (specific types only)

The automatic shut-off function automatically switches off the iron if it 

has not been moved for a while.

,

The  red auto-off light flashes to indicate that the iron has been 

switched off by the automatic shut-off function (Fig. 8).

To let the iron heat up again:

  1 

 Pick up the iron or move it slightly.

,

The automatic shut-off light stops flashing. 

,

If the temperature of the soleplate has dropped below the set 

ironing temperature, the temperature light goes on.

  2 

 If the temperature light goes on after you have moved the iron, 

wait for it to go out before you start ironing.

Note: If the temperature light does not go on after you move the iron, the 

soleplate still has the right temperature and the iron is ready for use.

EnGlISh

11

4239.000.7163.1.indd   11

20-05-09   09:02