Утюги Bosch Sensixx’x DI90 ProHygienic TDI903231H - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
21
B O S C H
EN
gl
ISH
Accessories
The accessories may be purchased from the customer service
or specialist shops.
Descaling liquid
“StoreProtect”
“TextileProtect”
For deep descaling of the
steam iron.
Contents: 4 bottles x 25 ml
Enables an immediate and safe
storage of the iron, even with a
hot soleplate.
Used for steam-ironing delicate
garments at maximum
temperature and maximum
steam without damaging them.
Name: TDZ1101
Name: TDZ1750
Name: TDZ1550
Accessory code: 00311715
Accessory code: 00575960
Accessory code: 00575494
Trouble shooting
Problem
Probable cause
Solution
The iron does not heat
up.
The “SensorSteam” function
has been activated. The iron is
set to stand-by.
Grip the handle of the iron to
re-start it.
Water drips out of the
soleplate when using
the “shot of steam”
function.
You have pressed the shot of
steam button (6) repeatedly
without waiting for 5 seconds
between each press.
Wait 5 seconds between each
press of the shot of steam button.
Steam does not come
out in horizontal
position.
Dry ironing steam mode has
been selected.
Set the steam control to “eco” or
“max” position.
Excessive dripping or
steaming.
No proper closing of “clean”
button (11).
Point the iron away from the
ironing area. Actuate a few times
the “clean” button.
The motor does not
work.
The iron is not in a horizontal
position.
Use the iron in a horizontal
position.
Smoke comes out
when connecting the
iron for the first time.
This may be caused by the
lubrication of some of the
internal parts.
This is normal and will stop after a
few minutes.
Deposits come out
through the holes in the
soleplate (10).
Traces of lime scale are coming
out of the steam chamber.
Carry out a cleaning cycle (see
“Calc'n Clean function” section).
The appliance makes a
pumping sound.
Water is being pumped into the
steam chamber.
This is normal.
If none of the above solves the problem, get in touch with an
Authorised Technical Service.
