Утюги Bosch Sensixx’x DI90 ProHygienic TDI903231H - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
17
B O S C H
EN
gl
ISH
“i-Temp” programme
This programme sets an appropriate combination of temperature
and steam, which is suitable for all fabrics that can be ironed
(symbols
).
The “i-Temp” programme does not apply to fabrics that cannot
be ironed (symbol
).
Please check the garment care label for details or try ironing on
a part of the fabric not visible normally.
AntiShine
“AntiShine” programme *
Suitable for dark and delicate fabrics. Reduces the risk of shiny
marks when ironing.
Tip:
Try to iron the fabrics while they are still damp after
washing. Steam will be generated from the fabrics rather than
the iron.
Hygienic
“Hygienic” programme *
Suitable for all kinds of fabrics and extremely efficient in both
thick and delicate garments.
The unique combination of temperature and interval steam
provides a sanitizing effect requiring no chemical additives.
Tip:
To ensure the maximum efficiency of the “Hygienic”
programme, it is recommended to set the steam mode to “max”
(see section 5).
4. “SensorSteam” function
After the initial heating, “SensorSteam” function switches off the
iron when it is left unattended, thus increasing security and
saving energy.
1
While the handle is gripped, the iron heats up. The
“SensorSteam” indicator lamp (2) will remain lit continuously.
2
When the handle is released, the “SensorSteam” function is
activated. The “SensorSteam” indicator lamp (2) will flash.
5. Steam settings
This iron generates steam by means of a built-in motor. While
the motor is working, the "MotorSteam" indicator lamps (15) of
the water tank come on.
The iron is equipped with a sensor so that the steam is
generated only while ironing in a horizontal position. Thus,
unnecessary steam production is avoided.
* Model dependent
