JVC KS-FX815 - Инструкция по эксплуатации - Страница 18

18

ENGLISH

Other convenient tape functions

Skipping the blank portions on the tape

You can skip blank portions between the tunes
(Blank Skip).
When this function is on, the unit skips blank
portions of 15 seconds or more, fast-forwards to
the next tune, then starts playing it.
• See also “Changing the general settings (PSM)”

on page 22.

1

Press and hold SEL (select) for more
than 2 seconds so that one of the
PSM items appears on the display.
(PSM: see page 23.)

2

Press 

¢

 or 

4

 to select

“B. SKIP” (blank skip).

3

Turn the control dial clockwise to
select “ON.”

Now Blank Skip is
activated.

4

Press SEL (select) to finish the setting.

To cancel Blank Skip, repeat the same
procedure and select “OFF” in step 3 by turning
the control dial counterclockwise.

Playing the current tune repeatedly

You can play the current tune repeatedly (Repeat
Play).

Press RPT 

 (repeat/Dolby B) while

playing a tune you want to hear over
again.

Each time you briefly press the
button, Repeat Play turns on and
off alternately.

When the tune has been played, the tape is
automatically rewound to the beginning of that
tune and the same tune will be played again.

To cancel Repeat Play, press RPT 

 again so

that the RPT indicator goes off.

Note:

In the following cases, Blank Skip and Repeat Play
may not operate correctly:
– Tapes with tunes having long pianissimo passages

(very quiet parts) or non-recorded portions during
tunes.

– Tapes with short non-recorded sections.
– Tapes with high level noise or humming between

tunes.

– The Dolby NR setting does not match. For example,

if Dolby B NR is on and the tape was recorded with
no Dolby NR.

Lights up when Repeat Play is turned on.