JVC KD-SX947R - Инструкция по эксплуатации - Страница 31

31

ENGLISH

*

1

When you adjust the bass, treble, or loudness, the
adjustment you have made is stored for the currently
selected sound mode (C-EQ) including “USER.”

*

2

If you are using a two-speaker system, set the fader
level to “00.”

*

3

Normally the control dial works as the volume
control. So you do not have to select “VOL” to
adjust the volume level.

2

Adjust the setting.

3

Repeat steps 

1 

and 

2

 to adjust the

other items.

To reset each sound mode to the factory
settings,

 repeat the same procedure and

reassign the preset values listed in the table on
page 30.

To increase the level or
turn on the loudness

To decrease the level or
turn off the loudness

Adjusting the sound

You can adjust the sound characteristics to your
preference.

1

Select the item you want to adjust.

Each time you press the
button, the adjustable items
change as follows:

Indication

To do:

Range

BAS*

1

Adjust the bass.

–06 (min.)
   |
+06 (max.)

TRE*

1

Adjust the treble.

–06 (min.)
   |
+06 (max.)

FAD*

2

Adjust the front

R06 (Rear only)

and rear speaker

   |

balance.

F06 (Front only)

BAL

Adjust the left

L06 (Left only)

and right speaker

   |

balance.

R06 (Right only)

LOUD*

1

Boost low and high
frequencies to

LOUD ON

produce a well-

  |

balanced sound

LOUD OFF

at low volume level.

WOOFER Adjust the

0 (min.)

subwoofer output

  |

level.

8 (max.)

VOL*

3

Adjust the volume.

00 (min.)
  |
50 (max.)

Ex. 1: When you adjust “TRE” (treble)

Ex. 2: When you turn on the loudness

Equalization pattern changes
as you adjust the bass or treble.

VOL

(volume)

BAS

(bass)

TRE

(treble)

FAD

(fader)

BAL

(balance)

WOOFER

LOUD

(loudness)

(subwoofer)