Электрический коса SKIL F0150739RA - Инструкция по эксплуатации - Страница 17

17

-

allow the cutting mechanism to stop rotating before 

switching on again

!

do not rapidly switch on and of

• 

Operating the tool 

y

!

ensure that the cutting area is free of stones, 

debris and other foreign objects

-

ensure that shoulder strap R 

2

 is adjusted correctly 

before operating the tool

!

start trimming only when tool runs at full speed

-

start trimming near the mains socket and move away 

while working

-

do not overload the tool

• 

Holding and guiding the tool 

u

-

always use the tool while carrying it with strap R 

across your shoulder (

in case of emergency remove 

shoulder strap by simply pulling red tag as 

illustrated

)

-

hold tool irmly with both hands, so you will have full 

control of the tool at all times

-

maintain a stable working position

-

always hold the tool well away from your body

WHEN USING TOOL AS LINE TRIMMER

• 

Application advice

-

cut long grass in layers (always start from the top)

-

only trim with the tip of the cutting line

-

do not cut damp or wet grass

-

prevent the cut grass from clogging the spool (do not 

make heavy cuts)

-

carefully cut around trees and bushes, so that they do 

not come into contact with the cutting lines

-

keep the tool away from solid objects in order to 

protect the cutting lines against excessive wear

-

for cutting long grass slowly swing the tool from right to 

left and vice versa

-

for cutting shorter grass tilt the tool as illustrated

• 

Line feeding 

i

-

tap button T lightly on a solid surface while the motor 

is running

-

two cutting lines will be released and cut of to the 

correct length by line cutting knife V each time the tool 

is switched on

!

ensure that the transparent cover is removed 

from line cutting knife V before using the tool

-

feed the lines regularly to maintain full cutting circle

!

take care against injury from line cutting knife V

-

when the motor runs without load and no grass is cut, 

the cutting lines are worn or broken; rewind or replace 

the spool

• 

Rewinding spool 

o

In case the cutting lines fail to protrude from spool cap 

XY

!

switch of the tool and disconnect the plug

-

irst unscrew complete spool system from tool; then 

unscrew button T from spool and take out spool from 

spool cap XY

-

tightly rewind both cutting lines evenly in layers

-

insert both lines into spool slots X and ensure that they 

are securely in place (leave suicient length of line)

-

thread both lines through spool holes Y before placing 

the rewound spool into spool cap XY

• 

Do not get distracted and always concentrate on what 

you are doing

• 

Always disconnect plug from power source

-

whenever leaving the tool unattended

-

before clearing jammed material

-

before checking, cleaning or working on the tool

-

after striking a foreign object

-

whenever the tool starts vibrating abnormally

AFTER USE

•  Always switch of tool and disconnect plug 

from power source before making adjustments, 

changing the cutting mechanism, cleaning, or 

leaving the tool unattended for any period

• 

When transporting or storing the tool, always mount 

blade cover X 

2

• 

Store the tool 

indoors

 in a dry and locked-up place, out 

of reach of children

EXPLANATION OF SYMBOLS ON TOOL

3

Warning

! Read the instruction manual

4

  Do not expose tool to rain

5

Pay attention to the risk of injury caused by lying 

debris

 (keep bystanders at least 15 meters away from 

work area)

6

  Immediately disconnect the plug if the (extension) cord 

is damaged or cut through while working

7

  Double insulation (no earth wire required)

8

  Be aware of the kickback forces that occur when solid 

objects are touched

9

  Wear head protection, protective glasses and hearing 

protection

q

  Wear slip-resistant gloves when using the tool as a 

brush cutter

w

  Wear slip-resistant safety footwear when using the tool 

as a brush cutter

WHEN CONNECTING NEW 3-PIN PLUG (U.K. ONLY):

• 

If for any reason the old plug is cut of the cord of 

this tool, it must be disposed of safely and not left 

unattended

• 

Do not connect the blue (= neutral) or brown (= live) wire 

in the cord of this tool to the earth terminal of the plug

USE

• 

Assembly instructions 

e

-

the sequence of the numbers appearing in the drawing 

corresponds with the sequence of the steps to be 

followed for assembling the tool

-

guide handle A can be adjusted by loosening/

tightening knob B

!

never use the tool without cutting guard C

!

irmly tighten all screws, bolts and nuts

• 

Cord restraint 

r

-

hook the loop in the extension cord over restraint D as 

illustrated

-

pull tight to secure the extension cord

• 

On/of safety switch 

t

Prevents the tool from being switched on accidentally

-

switch on tool by irst pressing safety switch P and 

then pulling trigger switch Q

-

switch of tool by releasing trigger switch Q

!

after switching of the tool the cutting mechanism 

continues to rotate for a few seconds