Ryobi ONE+ RLT18X3350 5133003652 - Инструкция по эксплуатации - Страница 6

4

| English

 WARNING

Servicing requires extreme care and 
knowledge and should be performed 
only by a quali

fi

 ed service technician. For 

service, we suggest you bring the product 
to your nearest authorized service center for 
repair. When servicing, use only identical 
replacement parts.

■

Switch off and remove the battery the pack 
before conducting any maintenance or 
cleaning work.

■

You may make adjustments and repairs 
described in this manual. For other repairs, 
contact the authorised service agent.

■

For replacement line, use only nylon 
filament line of the diameter described in 
the specification table of this manual

■

After extending new cutter line, always 
return the product to its normal operating 
position before starting.

■

After each use, clean the product with a 
soft dry cloth. Any part that is damaged 
should be properly repaired or replaced by 
an authorised service centre.

■

Check all nuts, bolts, and screws at frequent 
intervals for proper tightness to ensure the 
product is in safe working condition. Any 
part that is damaged should be properly 
repaired or replaced by an authorised 
service centre.

■

Bring the product to an authorised service 
centre to replace damaged or unreadable 
labels.

RESIDUAL RISK

Even when the product is used as prescribed, 
it is still impossible to completely eliminate 
certain residual risk factors. The following 
hazards may arise in use and the operator 
should pay special attention to avoid the 
following: 

■

Injury caused by vibration

–

Hold the product by designated handles 
and restrict working time and exposure.

■

Injury caused by exposure to noise

–

Wear hearing protection and limit 
exposure.

■

Injury caused by flying debris.

–

Wear eye protection at all times. 

RISK REDUCTION

It has been reported that vibrations from 
handheld tools may contribute to a condition 
called Raynaud’s Syndrome. Symptoms may 
include tingling, numbness and blanching of 
the 

fi

 ngers, usually apparent upon exposure 

to cold. Hereditary factors, exposure to cold 
and dampness, diet, smoking and work 
practices are all thought to contribute to the 
development of these symptoms. There are 
measures that can be taken by the operator to 
possibly reduce the effects of vibration:

■

Keep your body warm in cold weather. 
When operating the product, wear gloves 
to keep the hands and wrists warm. It is 
reported that cold weather is a major factor 
contributing to Raynaud’s Syndrome. 

■

After each period of operation, exercise to 
increase blood circulation.

■

Take frequent work breaks. Limit the 
amount of exposure per day. 

If you experience any of the symptoms of this 
condition, immediately discontinue use and 
see your physician.

 WARNING

Injuries may be caused, or aggravated, by 
prolonged use of a tool. When using any 
tool for prolonged periods, ensure you take 
regular breaks.

KNOW YOUR PRODUCT

See page 154.

Parts

1. Rear handle
2. Trigger
3.  Flailing blade accessory
4. Telescoping collar
5. Charger
6.  Battery latch button
7. Battery pack