Триммеры Ryobi ONE+ RLT18X3350 5133003652 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
3
English
|
EN
FR
DE
ES
IT
NL
PT
DA
SV
FI
NO
RU
PL
CS
HU
RO
LV
LT
ET
HR
SL
SK
BG
UK
TR
■
Secure long hair so it is above shoulder
level to prevent entanglement in moving
parts.
■
The small blade fitted to the safety guard
is designed to trim the new extended line
to the correct length for safe and optimum
performance. It is very sharp, do not touch
it particularly when cleaning the product.
■
Always ensure that ventilation openings
are kept clear of debris.
■
Before use and after any impact, check that
there are no damaged parts. A defective
switch or any part that is damaged should
be properly repaired or replaced by an
authorised service centre.
■
Make sure the cutting head attachment is
properly installed and securely fastened.
■
Make sure all guards, deflectors, and
handles are properly and securely attached.
■
Do not modify the product in any way, this
may increase the risk of injury to yourself
or others.
■
Use only the manufacturer’s replacement
cutting line. Do not use any other cutting
attachment.
■
Immediately switch off and remove the
battery pack in the event of accident or
breakdown. Do not operate the product
again until it has been fully checked by an
authorised service centre.
ADDITIONAL BATTERY SAFETY
WARNINGS
WARNING
To reduce the risk of
fi
re, personal injury,
and product damage due to a short circuit,
never immerse your tool, battery pack or
charger in
fl
uid or allow a
fl
uid to
fl
ow inside
them. Corrosive or conductive
fl
uids, such
as seawater, certain industrial chemicals,
and bleach or bleach-containing products,
etc., can cause a short circuit.
WARNING
Ensure that the line cut-off blade in guard
is properly positioned and secured before
each use.
TRANSPORTATION AND STORAGE
■
Stop the product, remove the battery pack,
and allow it to cool down before storing or
transporting.
■
Clean all foreign material from the product.
■
Do not store or transport the product
with batteries fitted, remove and secure
separately. Store the product in a cool,
dry, and well-ventilated place that is
inaccessible to children. Keep away
from corrosive agents, such as garden
chemicals and de-icing salts. Do not store
outdoors.
■
For transportation in vehicles, secure the
product against movement or falling to
prevent injury to persons or damage to the
product.
TRANSPORTING LITHIUM BATTERIES
Transport the battery in accordance with local
and national provisions and regulations.
Follow all special requirements on packaging
and labelling when transporting batteries by a
third party. Ensure that no batteries can come
in contact with other batteries or conductive
materials while in transport by protecting
exposed connectors with insulating, non-
conductive caps or tape. Do not transport
batteries that are cracked or leaking. Check
with the forwarding company for further
advice.
MAINTENANCE
WARNING
Use only original manufacturer’s
replacement parts, accessories, and
attachments. Failure to do so can
cause possible injury, contribute to poor
performance, and may void your warranty.
