Ryobi MAX POWER RY36ELTX33A-140 5133004547 - Инструкция по эксплуатации - Страница 4

2

| English

■

Keep the head attachment below waist level.

■

Never operate the product with damaged guards or 
without guards in place.

■

Do not fit a metal replacement line.

■

Keep hands and feet away from the cutting means at all 
times, especially when turning on the motor.

■

Beware, the cutting means continue to rotate after the 
motor is turned off.

■

Beware of objects thrown by the cutting means. Clear 
debris like small stones, gravel, and other foreign 
objects from the work area before starting operation. 
Wires or string may become entangled with the cutting 
means.

■

To reduce the risk of injury associated with contacting 
moving parts, always turn off the product, remove the 
battery pack, and allow both to cool down. Make sure 
that all moving parts have come to a complete stop:

●

before servicing

●

before clearing a blockage

●

before checking, cleaning, and working on the 
product

●

before changing accessories

●

after striking a foreign object

●

whenever leaving the product unattended

●

whenever performing maintenance

●

whenever the product starts to vibrate abnormally

■

Wear full eye and hearing protection while operating the 
product. If working in an area where there is a risk of 
falling objects, head protection must be worn.

■

Hearing protection may restrict the operator’s ability 
to hear warning sounds. Pay particular attention to 
potential hazards around and inside the working area.

■

Wear heavy, long trousers, boots, and gloves. Do not 
wear loose-fitting clothing, short trousers, or jewellery 
of any kind, and do not use the product with bare feet.

■

Secure long hair so that it is above shoulder level to 
prevent entanglement in moving parts.

■

The small blade fitted to the lawn guard is designed to 
trim the new extended line to the correct length for safe 
and optimum performance. The blade is very sharp. 
Do not touch the blade, particularly when cleaning the 
product.

■

Always ensure that ventilation openings are kept clear 
of debris.

■

Before use and after any impact, check that there are 
no damaged parts on the product. A defective switch or 
any part that is damaged should be properly repaired or 
replaced by an authorised service centre.

■

Make sure that the cutting head attachment is properly 
installed and securely fastened.

■

Make sure that all the guards, deflectors, and handles 
are properly and securely attached.

■

Do not modify the product in any way. This may 
increase the risk of injury to yourself or others.

■

Use only the manufacturer’s replacement cutting line. 
Do not use any other cutting attachment.

■

Immediately turn off the product and remove the battery 
pack in the event of accident or breakdown. Do not 
operate the product again until it has been fully checked 
by an authorised service centre.

 WARNING

Ensure that the line cut-off blade in the guard is properly 
positioned and secured before each use.

ADDITIONAL BATTERY SAFETY WARNINGS

 WARNING

To reduce the risk of 

fi

 re, personal injury, and product 

damage due to a short circuit, never immerse your 
tool, battery pack, or charger in 

fl

 uid or allow a 

fl

 uid  to 

fl

 ow inside them. Corrosive or conductive 

fl

 uids,  such 

as seawater, certain industrial chemicals, and bleach 
or bleach-containing products, etc., can cause a short 
circuit.

TRANSPORTATION AND STORAGE

■

Turn off the product, remove the battery pack, and allow 
the product to cool down before storing or transporting.

■

Clean all foreign material from the product.

■

Do not store or transport the product with the battery 
pack fitted. Remove the battery pack, and secure it 
separately. Store the product in a cool, dry, and well-
ventilated place that is inaccessible to children. Keep 
the product away from corrosive agents, such as 
garden chemicals and de-icing salts. Do not store the 
product outdoors.

■

For transportation in vehicles, secure the product 
against movement or falling to prevent injury to persons 
or damage to the product.

TRANSPORTING LITHIUM BATTERIES

Transport the battery pack in accordance with local and 
national provisions and regulations. Follow all special 
requirements on packaging and labelling when transporting 
batteries by a third party.
Ensure that no battery packs can come in contact with 
other batteries or conductive materials while in transport 
by protecting exposed connectors with insulating, non-
conductive caps or tape. Do not transport battery packs 
that are cracked or leaking. Check with the forwarding 
company for further advice.

MAINTENANCE

 WARNING

Use only original manufacturer’s replacement parts, 
accessories, and attachments. Failure to do so can cause 
possible injury, can contribute to poor performance, and 
may void your warranty.