Триммеры Makita UR3502 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
12
TROUBLE SHOOTING
Before asking for repairs, conduct your own inspection first. If you find a problem that is not explained in the manual,
do not attempt to dismantle the tool. Instead, ask Makita Authorized Service Centers, always using Makita replacement
parts for repairs.
Malfunction status
Cause
Action
Motor does not run.
Power mains is not plugged in.
Plug in the mains.
Power cable broken.
Ask your local authorized service
center for repair.
The drive system does not work
correctly.
Motor stops running after a little use. Overheating.
Stop using of tool to allow it to cool
down.
It does not reach maximum RPM.
The drive system does not work
correctly.
Ask your local authorized service
center for repair.
Cutting tool does not rotate:
stop the machine immediately!
Foreign object such as a branch is
jammed between the guard and the
cutting tool.
Remove the foreign object.
Cutter blade fastening nut is loose.
Tighten the nut properly as described
in this manual.
The cutter blade is bended.
Replace the cutter blade.
The drive system does not work
correctly.
Ask your local authorized service
center for repair.
Abnormal vibration:
stop the machine immediately!
One end of the nylon cord has been
broken.
Bump the nylon cutting head against
the ground while it is rotating to
cause the cord to feed.
The cutter blade is bended, cracked
or worn.
Replace the cutter blade.
Cutter blade fastening nut is loose.
Tighten the nut properly as described
in this manual.
Cutter blade is fastened improperly.
The drive system does not work
correctly.
Ask your local authorized service
center for repair.
Cutting tool and motor cannot stop:
Disconnect
the
mains
plug
immediately!
Electric or electronic malfunction.
Disconnect the mains plug and ask
your local authorized service center
for repair.
OPTIONAL ACCESSORIES
CAUTION:
• These accessories or attachments are recommended
for use with your Makita tool specified in this manual.
The use of any other accessories or attachments might
present a risk of injury to persons. Only use accessory
or attachment for its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
• Cutter blade
• Nylon cutting head
• Nylon cord (cutting line)
• Shoulder harness
NOTE:
• Some items in the list may be included in the tool
package as standard accessories. They may differ from
country to country.
