Makita DUR181Z - Инструкция по эксплуатации - Страница 5

5 

Uncertainty (K) : 2.5 dB(A) 

Wear ear protection

ENG904-1 

Vibration 

The vibration emission value determined according to 
EN786: 

Vibration emission (a

h

) : 2.5 m/s

2

 or less 

Uncertainty (K) : 1.5 m/s

2 

ENG901-1 

• 

The declared vibration emission value has been 
measured in accordance with the standard test 
method and may be used for comparing one tool 
with another. 

• 

The declared vibration emission value may also be 
used in a preliminary assessment of exposure. 

WARNING: 

• 

The vibration emission during actual use of the 
power tool can differ from the declared emission 
value depending on the ways in which the tool is 
used. 

• 

Be sure to identify safety measures to protect the 
operator that are based on an estimation of 
exposure in the actual conditions of use (taking 
account of all parts of the operating cycle such as 
the times when the tool is switched off and when it 
is running idle in addition to the trigger time). 
 

ENH219-2 

For European countries only 

EC Declaration of Conformity 

We Makita Corporation as the responsible 
manufacturer declare that the following Makita 
machine(s): 

Designation of Machine: 
Cordless String Trimmer 
Model No./ Type: BUR141, BUR181 
Specifications: see "SPECIFICATIONS" table. 

are of series production and 

Conforms to the following European Directives: 

2000/14/EC, 2006/42/EC 

And are manufactured in accordance with the following 
standards or standardised documents: 

EN60745,EN60335 

The technical documentation is kept by:   

Makita International Europe Ltd. 
Technical Department, 
Michigan Drive, Tongwell, 
Milton Keynes, Bucks MK15 8JD, England 
 

The conformity assessment procedure required by 
Directive 2000/14/EC was in Accordance with annex VI. 
 
 
 
 

Notified Body: 

TÜV Rheinland LGA Products GmbH 
Tillystraße 2 
90431 Nürnberg, Germany 
Identification number 0197 

Model BUR141 
Measured Sound Power Level: 83.7dB (A) 
Guaranteed Sound Power Level: 85dB (A) 
 
Model BUR181 
Measured Sound Power Level: 88.5dB (A) 
Guaranteed Sound Power Level: 91dB (A) 
 

23.9.2011 

000230 

Tomoyasu Kato 

Director 

Makita Corporation 

3-11-8, Sumiyoshi-cho, 

Anjo, Aichi, 446-8502, JAPAN 

GEB092-3 

IMPORTANT SAFETY 
INSTRUCTIONS 

WARNING! Read all safety warnings and all 

instructions.

 Failure to follow the warnings and 

instructions may result in electric shock, fire and/or 
serious injury. 

Save all warnings and 
instructions for future reference. 

1. 

Be familiar with the controls and proper use of 
the equipment. 

2. 

Cutting elements continue to rotate after the 
motor is switched off. 

3. 

Never allow children or people unfamiliar with 
the instructions to use the machine. 

4. 

Stop using the machine while people, 
especially children, or pets are nearby. 

5. 

Only use the machine in daylight or good 
artificial light. 

6. 

Before using the machine and after any impact, 

check for signs of wear or damage and repair 
as necessary. 

7. 

Take care against injury from any device fitted 
for trimming the filament line length. After 
extending new cutter line always return the 
machine to its normal operating position 
before switching on. 

8. 

Never fit metal cutting elements. 

9. 

This appliance is not intended for use by 
persons (including children) with reduced 
physical, sensory or mental capabilities, or 
lack of experience and knowledge, unless they