Stopping - Комплект: двигатель 9666571-02 + вал 9666572-02 Husqvarna 143R-II 9666570-02 - Инструкция по эксплуатации - Страница 72

STARTING AND STOPPING

72 – English

Choke:

 Set the choke control in the choke position. 

Hold the body of the machine on the ground using your 
left hand (CAUTION! Not with your foot!). Grip the starter 
handle, slowly pull out the cord with your right hand until 
you feel some resistance (the starter pawls grip), now 
quickly and powerfully pull the cord. 

Never twist the 

starter cord around your hand.

Repeat pulling the cord until the engine starts. When the 
engine starts. return choke control to run position and 
apply full throttle; the throttle will automatically disengage 
from the start setting.

CAUTION! 

 Do not pull the starter cord all the way out and 

do not let go of the starter handle when the cord is fully 
extended. This can damage the machine.

CAUTION! 

 Do not put any part of your body in marked 

area. Contact can result in burns to the skin, or electrical 
shock if the spark plug cap has been damaged. Always 
use gloves. Do not use a machine with damaged spark 
plug cap.

For throttle handles with a start throttle 
lock:

Set the throttle to the start position by first pressing the 
throttle lockout and the throttle trigger, then pressing the 
start throttle button (A). Then release the throttle lockout 
and the throttle trigger, followed by the start throttle 
button. The throttle function is now activated. To return the 
engine to idle, press the throttle lockout and throttle 
trigger again.

Stopping

Stop the engine by switching off the ignition.

!

WARNING! When the engine is started 
with the choke in either the choke or 
start throttle positions the cutting 
attachment will start to rotate 
immediately.