Machine; Throttle lockout - Комплект: двигатель 9666571-02 + вал 9666572-02 Husqvarna 143R-II 9666570-02 - Инструкция по эксплуатации - Страница 61

GENERAL SAFETY PRECAUTIONS

English

 –

 61

BOOTS

Wear boots with steel toe-caps and non-slip sole.

CLOTHING

Wear clothes made of a strong fabric and avoid loose 
clothing that can catch on twigs and branches. Always 
wear heavy, long pants. Do not wear jewellery, shorts 
sandals or go barefoot. Secure hair so it is above shoulder 
level.

FIRST AID KIT

Always have a first aid kit nearby.

Machine

′

s safety equipment

This section describes the machine

′

s safety equipment, 

its purpose, and how checks and maintenance should be 
carried out to ensure that it operates correctly. See the 
”What is what?” section to locate where this equipment is 
positioned on your machine.

The life span of the machine can be reduced and the risk 
of accidents can increase if machine maintenance is not 
carried out correctly and if service and/or repairs are not 
carried out professionally. If you need further information 
please contact your nearest service workshop.

Throttle lockout

The throttle lockout is designed to prevent accidental 
operation of the throttle control. When you press the lock 
(A) (i.e. when you grasp the handle) it releases the throttle 
control (B). When you release the handle the throttle 

control and the throttle lockout both move back to their 
original positions. This movement is controlled by two 
independent return springs. This arrangement means that 
the throttle control is automatically locked at the idle 
setting.

Make sure the throttle control is locked at the idle setting 
when the throttle lockout is released.

Press the throttle lockout and make sure it returns to its 
original position when you release it.

Check that the throttle control and throttle lockout move 
freely and that the return springs work properly.

See instructions under the heading Start. Start the 
machine and apply full throttle. Release the throttle and 
check that the cutting attachment stops and remains at a 
standstill. If the cutting attachment rotates with the throttle 
in the idle position then the carburettor idle setting must 

IMPORTANT! All servicing and repair work on the 
machine requires special training. This is especially true 
of the machine¢s safety equipment. If your machine fails 
any of the checks described below you must contact 
your service agent. When you buy any of our products 
we guarantee the availability of professional repairs and 
service. If the retailer who sells your machine is not a 
servicing dealer, ask him for the address of your nearest 
service agent.

!

WARNING! Never use a machine with 
faulty safety equipment. The machine’s 
safety equipment must be checked and 
maintained as described in this section. 
If your machine fails any of these checks 
contact your service agent to get it 
repaired.

A

B