DEWALT FLEXVOLT 54 В BRUSHLESS DCMAS5713N-XJ - Инструкция по эксплуатации - Страница 7

5

English

Chargers

D

e

WALT

 chargers require no adjustment and are designed to be 

as easy as possible to operate.

Electrical Safety

The electric motor has been designed for one voltage only. 
Always check that the battery pack voltage corresponds to the 
voltage on the rating plate. Also make sure that the voltage of 
your charger corresponds to that of your mains.

i

Your 

D

e

WALT

 charger is double insulated in 

accordance with EN60335; therefore no earth wire 
is required.

If the supply cord is damaged, it must be replaced only by 

D

e

WALT

 or an authorised service organisation.

Mains Plug Replacement 
(U.K. & Ireland Only)

If a new mains plug needs to be fitted:

•  Safely dispose of the old plug.
•  Connect the brown lead to the live terminal in the plug.
•  Connect the blue lead to the neutral terminal.

WARNING: 

No connection is to be made to the 

earth terminal.

Follow the fitting instructions supplied with good quality plugs. 
Recommended fuse: 3 A.

Using an Extension Cable

An extension cord should not be used unless absolutely 
necessary. Use an approved extension cable suitable for 
the power input of your charger (see 

Technical Data

). The 

minimum conductor size is 1 mm

2

; the maximum length 

is 30 m.

6)  Service

a ) 

Have your power tool serviced by a qualified repair 
person using only identical replacement parts.

This 

will ensure that the safety of the power tool is maintained.

b ) 

Never service damaged battery packs.

 Service 

of battery packs should only be performed by the 
manufacturer or authorized service providers.

Safety of Others

a )  This appliance is not intended for use by persons 

(including children) with reduced physical, sensory or 
mental capabilities, or lack of experience and knowledge, 
unless they have been given supervision or instruction 
concerning use of the appliance by a person responsible 
for their safety.

b )  Children must be supervised to ensure that they do not 

play with the appliance.

c )  When the appliance is stored or transported in a 

vehicle it should be placed in the boot or restrained to 
prevent movement following sudden changes in speed 
or direction.

d )  When not in use, the appliance should be stored in a dry, 

well ventilated place out of reach of children.

e )  Children should not have access to stored appliances.

preventive safety measures reduce the risk of starting the 
power tool accidentally.

d ) 

Store idle power tools out of the reach of children 
and do not allow persons unfamiliar with the power 
tool or these instructions to operate the power tool. 

Power tools are dangerous in the hands of untrained users.

e ) 

Maintain power tools and accessories. Check for 
misalignment or binding of moving parts, breakage 
of parts and any other condition that may affect the 
power tool’s operation. If damaged, have the power 
tool repaired before use. 

Many accidents are caused by 

poorly maintained power tools.

f ) 

Keep cutting tools sharp and clean. 

Properly 

maintained cutting tools with sharp cutting edges are less 
likely to bind and are easier to control.

g ) 

Use the power tool, accessories and tool bits etc. 
in accordance with these instructions, taking into 
account the working conditions and the work to be 
performed. 

Use of the power tool for operations different 

from those intended could result in a hazardous situation.

h ) 

Keep handles and grasping surfaces dry, clean and 
free from oil and grease.

 Slippery handles and grasping 

surfaces do not allow for safe handling and control of the 
tool in unexpected situations.

5)  Battery Tool Use and Care

a ) 

Recharge only with the charger specified by the 
manufacturer.

 A charger that is suitable for one type 

of battery pack may create a risk of fire when used with 
another battery pack.

b ) 

Use power tools only with specifically designated 
battery packs.

 Use of any other battery packs may create 

a risk of injury and fire.

c ) 

When battery pack is not in use, keep it away from 
other metal objects, like paper clips, coins, keys, 
nails, screws or other small metal objects, that can 
make a connection from one terminal to another.

Shorting the battery terminals together may cause burns 
or a fire.

d ) 

Under abusive conditions, liquid may be ejected 
from the battery; avoid contact. If contact 
accidentally occurs, flush with water. If liquid 
contacts eyes, additionally seek medical help.

 Liquid 

ejected from the battery may cause irritation or burns.

e ) 

Do not use a battery pack or tool that is damaged or 
modified.

 Damaged or modified batteries may exhibit 

unpredictable behaviour resulting in fire, explosion or risk 
of injury.

f ) 

Do not expose a battery pack or tool to fire or 
excessive temperature.

 Exposure to fire or temperature 

above 130 °C may cause explosion.

g ) 

Follow all charging instructions and do not charge 
the battery pack or tool outside the temperature 
range specified in the instructions.

 Charging 

improperly or at temperatures outside the specified range 
may damage the battery and increase the risk of fire.