Триммеры Bosch ART 26 SL 0.600.8A5.100 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
14
| English
F 016 L81 186 | (16.9.14)
Bosch Power Tools
Mounting and Operation
Do not disassemble guard and metal tube once con-
nected.
Do not connect the machine to the mains socket before
it is completely assembled.
The cutting line continues to rotate for a few seconds
after the trimmer is switched off. Allow the motor/cut-
ting line to stop rotating before switching “on” again.
Do not rapidly switch off and on.
Remove any grass from spool cover when changing line
or spool.
Only use Bosch approved cutting elements. Cutting
performance will vary with different cutting elements.
Check the guard screw is fixed tightly before using.
Check the tube joint is on correct position before using.
The machine will automatically feed and cut the line when the
tool starts and stops.
Troubleshooting
Action
Figure
Page
Delivery Scope
1
189
Removing the Rubber Stop
2
189
Connecting the Tube
3
190
Mounting the Cutting Guard
4
190
Connecting the Extension Lead
Switching On and Off
5
191
Semi-auto feeding of 8 mm cutting
line when starting the tool
6
191
Removing the line spool
7
192
Mounting the line spool
8
192
Feed cutting line using manual feed
button
9
193
Maintenance, Cleaning and Storage
10
193
Selecting Accessories
11
194
Problem
Possible Cause
Corrective Action
Trimmer fails to operate
Power turned off
Turn power on
Mains socket faulty
Use another socket
Extension cable damaged
Inspect cable, replace if damaged
Fuse faulty / blown
Replace fuse
Trimmer runs intermittently
Extension cable damaged
Inspect cable, replace if damaged
Contact Service Agent
Internal wiring of machine
damaged
Contact Service Agent
Trimmer motor is stalling
Grass too high
Cut in stages
Trimmer does not cut
Cutting line too short/broken off
Feed cutting line using manual feed button (see
figure 9)
Spool empty
Replace the spool
Line can not be fed
Cutting line too short/broken off
Feed cutting line using manual feed button (see
figure 9)
Line inside the spool entangled
Inspect the spool, rewind if necessary
Spool empty
Replace the spool
Line retracts into spool
Cutting line too short/broken off
Rewind spool
Line keeps breaking
Line inside the spool entangled
Inspect the spool, rewind if necessary
Trimmer used incorrectly
Only trim with the tip of the line, avoid stones, walls
and other hard objects. Feed the line regularly to main-
tain full cutting width.
OBJ_BUCH-2058-003.book Page 14 Tuesday, September 16, 2014 2:30 PM
