Триммеры Bosch ART 26 SL 0.600.8A5.100 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
12
| English
F 016 L81 186 | (16.9.14)
Bosch Power Tools
It is recommended for increased
electrical safety to use a Residual
Current Device (RCD) with a tripping
current of not more than 30 mA. Al-
ways check your RCD every time you
use it.
For products
not sold in GB
:
WARNING:
For your safety, it is re-
quired that the plug attached to the ma-
chine is connected with the extension
cord. The coupling of the extension
cord must be protected against splash
water, be made of rubber or coated
with rubber. The extension cord must
be used with a cable strain relief.
The connection lead must be inspected
for signs of damage at regular intervals
and may only be used if in perfect con-
dition.
If the supply cord is damaged, it must
be replaced by a Bosch Service Centre.
Extension cords/leads should only be
used if they comply with H05VV-F or
H05RN-F types.
Products sold in GB only
: Your prod-
uct is fitted with a BS 1363/A approved
electric plug with internal fuse (ASTA
approved to BS 1362).
If the plug is not suitable for your socket
outlets, it should be cut off and an ap-
propriate plug fitted in its place by an
authorised customer service agent.
The replacement plug should have the
same fuse rating as the original plug.
The severed plug must be disposed of
to avoid a possible shock hazard and
should never be inserted into a mains
socket elsewhere.
Products sold in AUS and NZ only
:
Use a residual current device (RCD)
with a rated residual current of 30 mA
or less.
Symbols
The following symbols are important for reading and under-
standing the operating instructions. Please take note of the
symbols and their meaning. The correct interpretation of the
symbols will help you to use the garden product in a better
and safer manner.
Intended Use
The machine is intended for the cutting of grass and weeds up
to a height of 125 mm that cannot be reached with the lawn
mower.
The machine is not intended to be used for edging and fea-
tures no edging application.
Intended use is related to operation within 0 ° C and 40 ° C
ambient temperature.
Symbol
Meaning
Wear protective gloves
Movement direction
Reaction direction
Weight
Switching On
Switching Off
Permitted action
Prohibited action
Audible noise
Accessories/Spare Parts
CLICK!
OBJ_BUCH-2058-003.book Page 12 Tuesday, September 16, 2014 2:30 PM
