Bosch ART 26-18 LI 0.600.8A5.E05 - Инструкция по эксплуатации - Страница 19

 English | 

19

Bosch Power Tools

F 016 L81 308 | (21.9.15)

Starting

For Your Safety



Warning: Switch off and remove battery from machine 
before adjusting or cleaning.



The blade continues to rotate for a few seconds after 
the cordless trimmer is switched off. Allow the mo-
tor/blade to stop rotating before switching “on” again.



Do not rapidly switch off and on.



Only use Bosch approved cutting elements. Cutting 
performance will vary with different cutting elements.

Battery Charging



Do not use other battery chargers. 

The supplied battery 

charger is designed for the Lithium-Ion battery in your gar-
den product.



Observe the mains voltage! 

The voltage of the power 

supply must correspond with the data given on the name-
plate of the battery charger. Battery chargers marked with 
230 V can also be operated with 220 V.

The battery is equipped with temperature monitoring that al-
lows charging only in the temperature range between 0  ° C 
and 45  ° C. In this manner, a high battery service life is 
achieved.

Note: 

The battery supplied is partially charged. To ensure full 

capacity of the battery, completely charge the battery in the 
battery charger before using your power tool for the first time.

The lithium-ion battery can be charged at any time without re-
ducing its service life. Interrupting the charging procedure 
does not damage the battery.

The “Electronic Cell Protection (ECP)” protects the lithium-
ion battery against deep discharging. When the battery is run 
down or discharged, the garden product is shut off by means 
of a protective circuit: The garden product no longer oper-
ates.

Do not continue to press the On/Off 
switch after the garden product has 

been automatically switched off. 

The battery can be dam-

aged.

Charging Procedure

The charging procedure starts as soon as the mains plug of 
the battery charger is plugged into the socket outlet and the 
battery  is inserted into the charging compartment .

Due to the intelligent charging method, the charging condi-
tion of the battery is automatically detected and the battery is 
charged with the optimum charging current, depending on 
battery temperature and voltage.

This gives longer life to the battery and always leaves it fully 
charged when kept in the charger for storage.

Meaning of the Indication Elements

(Fast) Flashing of the Green Battery Charge 
Indicator 

The rapid-charging procedure is indicated by 

fast flashing

 of the 

green

 battery charge indi-

cator .

Note: 

The rapid-charging procedure is only possible when the 

battery temperature is within the allowable charging temper-
ature range, see section “Technical Data”.

(Slow) Flashing of the Green Battery Charge 
Indicator 

When the charging condition of the battery is 

80 %

, the 

green

 battery charge indicator  

flashes slowly.

The battery can be removed for immediate use.

Continuous Lighting of the Green Battery Charge 
Indicator 

Continuous lighting

 of the 

green

 battery 

charge indicator  indicates that the battery is 
fully charged.

When the battery is not inserted, 

continuous lighting

 of the 

battery charge indicator  indicates that the mains plug is in-
serted in the socket and that the battery charger is ready for 
operation.

Continuous Lighting of the Red Battery Charge 
Indicator 

Continuous lighting

 of the 

red

 battery charge 

indicator  indicates that the temperature of the 

battery is not within the allowable charging temperature 
range, see section “Technical Data”. As soon as the allowable 
charging temperature range is reached, the battery charger 
automatically switches to rapid charging.

Flashing Red Battery Charge Indicator 

A 

flashing

red

 battery charge indicator  indi-

cates a different malfunction of the charging 
procedure, see section “Technical Data”.

Charging Advice

With continuous or several repetitive charging cycles without 
interruption, the charger can warm up. This is not meaningful 
and does not indicate a technical defect of the battery charg-
er.

A significantly reduced working period after charging indi-
cates that the battery is used and must be replaced.

Setting Handle Angle

8

284

Switching On and Off

9

285

Working Advice
Adjusting the Cutting Height

10

285

Maintenance, Cleaning and Storage

11

285

Selecting Accessories

12

286

Action

Figure

Page

OBJ_BUCH-1981-004.book  Page 19  Monday, September 21, 2015  8:23 AM