Decker GL9035 - Инструкция по эксплуатации - Страница 10

10

ENGLISH

Mains plug replacement (U.K. & Ireland 
only)

If a new mains plug needs to be 

fi

 tted:

♦

  Safely dispose of the old plug.

♦

  Connect the brown lead to the live terminal in 

the new plug.

♦

  Connect the blue lead to the neutral terminal.

Warning! 

No connection is to be made to the earth 

terminal. Follow the 

fi

  tting instructions supplied with 

good quality plugs. Recommended fuse: 5 A.

Troubleshooting

If your tool seems not to operate properly, follow 
the instructions below. If this does not solve the 
problem, please contact your local Black & Decker 
repair agent.

Warning! 

Before proceeding, unplug the tool.

Tool runs slowly

♦

  Check that the spool housing can rotate freely. 

Carefully clean it if necessary.

♦

  Check that the cutting line does not protrude 

more than 11 cm from the spool housing. If it 
does, cut it off so that it just reaches the line 
trimming blade.

Automatic line feed does not work

♦

  Keep the tabs depressed and remove the spool 

cover from the housing.

♦

  Pull the cutting line until it protrudes 11 cm from 

the housing. If insuf

fi

 cient cutting line is left on 

the spool, install a new spool of cutting line as 
instructed above.

♦

  Align the tabs on the spool cover with the cut 

outs in the housing.

♦

  Push the cover onto the housing until it snaps 

securely into place.

♦

  If the cutting line protrudes beyond the trimming 

blade, cut it off so that it just reaches the blade.

If the automatic line feed still does not work or the 
spool is jammed, try the following suggestions:

♦

  Carefully clean the spool cover and housing.

♦

  Remove the spool and check if the lever can 

move freely.

♦

  Remove the spool and unwind the cutting line, 

then wind it on neatly again as described above. 
Replace the spool as instructed.

Protecting the environment

Separate c ollection. This product must 
not  be  disposed  of  with  normal  household 
waste.

Should you 

fi

 nd one day that your Black & Decker 

product needs replacement, or if it is of no further 

use to you, do not dispose of it with household waste. 
Make this product available for separate collection.

Separate  collection  of  used  products  and 
packaging allows materials to be recycled 
and used again. Re-use of recycled materi-
als helps prevent environmental pollution 
and reduces the demand for raw materials.

Local regulations may provide for separate collec-
tion  of  electrical  products  from  the  household,  at 
municipal waste sites or by the retailer when you 
purchase a new product.

Black & Decker provides a facility for the collection 
and recycling of Black & Decker products once they 
have reached the end of their working life. To take 
advantage of this service please return your product 
to any authorised repair agent who will collect them 
on our behalf.

You can check the location of your nearest au-
thor ised  repair  agent  by  c ontacting  your  loc al 
Black & Decker of

fi

 ce at the address indicated 

in  this  manual.  Alternatively,  a  list  of  authorised 
Black & Decker repair agents and full details of our 
after-sales service and contacts are available on 
the Internet at: 

www.2helpU.com

.

Technical data

  GL7033 

GL8033 

GL9035

  (Type 1) 

(Type 1) 

(Type 1)

Voltage V

AC

230 230 230

Power input 

W  700 

800 

900

No-load speed 

min

-1

7000 7000 7000

Weight 

kg 

3.2 3.2 3.2

Level of sound pressure:

Sound pressure (L

pA

) 80 dB(A), uncertainty (K) 2 dB(A), 

Sound power (L

WA

) 94 dB(A), uncertainty (K) 2 dB(A)

Vibration total values (triax vector sum) according to EN 786:

Vibration emission value (a

h

) 8.2 m/s

2

, uncertainty (K) 1.5 m/s

2