Триммеры Alpina T 1.0 EJ 223536 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
EN
IDENTIFICATION OF MAIN COMPONENTS / SYMBOLS
3
[1]
Notice:
The vibration value indicated was determined with a standardized tool and can be used to make comparisons with other electric equipment
as well as temporary estimates of the load through the vibrations.
WARNING!
The vibration value may vary according to the usage of the machine and its fitted equipment, and be higher than the one indicated. Safety meas-
ures must be established to protect the user and must be based on the load estimate generated by the vibrations in real usage conditions. In
this regard, all the operational cycle phases must be taken into consideration, such as switching off or idle running.
The noise level may vary according to machine usage if working or running idle.
Maximum noise and vibration levels [1]
T 1.0 EJ
SGT 1000 J
Sound pressure level
– Measurement uncertainty
dB(A)
dB(A)
79.3
3
Guaranteed sound power level (2000/14/EC)
dB(A)
96
Vibration level
– Measurement uncertainty
m/s
2
m/s
2
2.56
1.5
TECHNICAL DATA
T 1.0 EJ
SGT 1000 J
Power supply voltage
V~
230
Power supply frequency
Hz
50
Engine Power
W
1000
Cutting width
cm
37
Mass
kg
4,70
No-load Speed
min
-1
7000
Maximum engine and tool rotation speed
r.p.m
7000
1)
Warning! Danger. The failure to use this
ma-chine correctly can be hazardous
for oneself andothers.
2)
Read the instruction manual before us-
ing themachine.
3)
If you are using the machine every day
in normal conditions, you can be ex-
posed to a noise level of 85 dB(A) or
higher. Wear earmuffs or ear-plugs, eye
protection and a protective helmet.
4)
Danger of flying objects! Keep any peo-
ple orpets at least 15 m away when us-
ing the machine!
5)
Disconnect the plug from the mains be-
fore commencing maintenance work or
if the power cord is damaged.
6)
Do not leave the machine in the rain (or
in damp conditions).
7)
Only one cutting line head can be used
on thismachine.
8)
Do not use pointed, rigid or metal
blades orcircular saw blades.
9)
Keep bystanders away.
10)
Cutting device rotation direction.
2. SYMBOLS
2
1
2
3
4
5
6
7
8
9
10
