Microlife BP W100 - Инструкция по эксплуатации - Страница 10

8

* Please consult your doctor, if this or any other problem occurs 
repeatedly.



If you think the results are unusual, please read through the 
information in «Section 1.» carefully.

9. Safety, Care, Accuracy Test and Disposal



Safety and protection



This instrument may only be used for the purposes described in 
this booklet. The manufacturer cannot be held liable for damage 
caused by incorrect application.



This instrument comprises sensitive components and must be 
treated with caution. Observe the storage and operating conditions 
described in the «Technical Specifications» section!



Protect it from:
- water and moisture
- extreme temperatures

- impact and dropping
- contamination and dust
- direct sunlight
- heat and cold



The cuffs are sensitive and must be handled with care.



Only pump up the cuff once fitted.



Do not use the instrument close to strong electromagnetic fields 
such as mobile telephones or radio installations.



Do not use the instrument if you think it is damaged or notice 
anything unusual.



Never open the instrument.



If the instrument is not going to be used for a prolonged period the 
batteries should be removed.



Read the additional safety instructions in the individual sections of 
this booklet.

Ensure that children do not use the instrument unsupervised; 
some parts are small enough to be swallowed.

Instrument care

Clean the instrument only with a soft, dry cloth.

Cleaning the cuff

Carefully remove any marks on the cuff with a damp cloth and mild 
detergent.

«

HI

»

Pulse  or  cuff 
pressure too 
high

The pressure in the cuff is too high (over 
300 mmHg) OR the pulse is too high (over 
200 beats per minute). Relax for 5 minutes 
and repeat the measurement.*

«

LO

»

Pulse too 
low

The pulse is too low (less than 40 beats 
per minute). Repeat the measurement.*

Error

Description Potential cause and remedy