Microlife AG1-40 - Инструкция по эксплуатации - Страница 15

Тонометры Microlife AG1-40 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.

Если остались вопросы, задайте их в комментариях после инструкции.

"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Страница:
/ 64
Загружаем инструкцию
background image

 

  Further information

The level of blood-pressure is subject to fluctuations even with healthy people. Important thereby 
is, that 

comparable measurements always require the same conditions (rest condition)!

If, in spite of observing all these factors, the fluctuations are more than 15 mmHg, and/or you 
hear irregular pulses on several occasions, please consult your doctor.

You must consult your specialist dealer or chemist if there are technical problems with the blood-
pressure instrument. 

Never attempt to repair the instrument yourself!

Any unauthorised opening of the instrument invalidates all guarantee claims!

6.  Care and maintenance, recalibration

With proper care and maintenance, this blood-pressure measuring device will provide years of 

satisfactory service. Follow the general rules below: 

•  Do not drop.
•  Never inflate beyond 300 mmHg.
•  Do not expose the device to either extreme temparatures, humidity, or direct sunlight.
•  Never contact the cuff fabric with a sharp instrument, since this could cause damage.
•  Always deflate cuff completely before storage.
•  Do not dismantle manometer under any circumstance.
•  Store the whole device in storage bag provided, to keep all the parts clean.
•  Storage temperature condition: -20 

°C to 70 °C at a relative air humidity of 85 % (non-

condensing).

•  Wipe off the manometer and bulb with a damp cloth. Sterilization is not necessary, since 

the parts of manometer should not come into direct contact with the patient‘s body during 
measurement.

•  Remove the bladder first, and wipe the velcro, bladder and tubes with a damp cloth. The cuff 

can be washed with soap and cold water. But do rinse the cuff with clear water and keep it 
air dry.

12

Полезные видео

Характеристики

Оцените статью
tehnopanorama.ru
Остались вопросы?

Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)

Задать вопрос

Часто задаваемые вопросы
Как посмотреть инструкцию к Microlife AG1-40?
Необходимо подождать полной загрузки инструкции в сером окне на данной странице
Руководство на русском языке?
Все наши руководства представлены на русском языке или схематично, поэтому вы без труда сможете разобраться с вашей моделью
Как скопировать текст из PDF?
Чтобы скопировать текст со страницы инструкции воспользуйтесь вкладкой "HTML"