B.Well WA-33 - Инструкция по эксплуатации - Страница 15

Instruction manual

WA-33

15

En

5.5. Discontinuing a measurement

If it is necessary to interrupt a blood pressure measurement for any reason
(e.g. the patient feels unwell), the          («O/I+Memory button») can be pressed at any time.
The device then immediately lowers the cuff -pressure automatically.

5.6. Memory – displaying the last measurement

The blood-pressure monitor automatically stores the last measurement value.
By pressing the            («O/I+Memory button») button for at least 3 seconds,
the last measurement will be displayed. If an irregular heartbeat interval was detected 
n any measurements stored in memory, the icon           will be displayed.

Further information

Measurements should not occur soon after each other, since otherwise, the results will be 
falsifi ed. Wait therefore for at least 1 minute in a relaxed position, sitting or lying, before you 
repeat a measurement

6. Error messages/malfunctions

If an error occurs during a measurement, the measurement is discontinued
and a corresponding error code is displayed
(Example: Error No. 1). 

IM_WA33_both_RU_EN_KZ_3614.indd   15

IM_WA33_both_RU_EN_KZ_3614.indd   15

03.09.2014   16:11:37

03.09.2014   16:11:37

Process Cyan

Process CyanProcess Magenta

Process MagentaProcess Yellow

Process YellowProcess Black

Process Black