B.Well WA-33 - Инструкция по эксплуатации - Страница 14

Instruction manual

WA-33

14

En

d) When the measurement has been concluded, a long beep tone sounds. The measured systolic and diastolic 
blood-pressure values as well as the pulse frequency are now displayed.

e) The appearance of the symbol            signifi es that an irregular heartbeat was detected.
This indicator is only a caution. It is important that you be relaxed, remain still and do not talk during measurements. 

NOTE: 

We recommend contacting your physician if you see this indicator frequently.

f ) The measurement results are displayed, until you switch the device off . If no button is pressed for 1 minutes, the 
device switches automatically off , to save the batteries.

5.4. Measuring procedure

After the cuff  has been appropriately positioned the measurement can begin:

a) Press the         («O/I+Memory button»), pump begins to infl ate  the cuff . In the display, the increasing 
cuff -pressure is continually displayed.

b) After reaching the infl ation pressure, the pump stops  and the pressure slowly falls away.
The cuff -pressure (large characters) is displayed during the measurement.

c) When the device has detected the pulse, the heart symbol in the display begins to blink and a peep 
tone is audible for every pulse beat.

IM_WA33_both_RU_EN_KZ_3614.indd   14

IM_WA33_both_RU_EN_KZ_3614.indd   14

03.09.2014   16:11:37

03.09.2014   16:11:37

Process Cyan

Process CyanProcess Magenta

Process MagentaProcess Yellow

Process YellowProcess Black

Process Black