Термометры RST 07853PRO (TH853) - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
RST07853
4
2.4
down (
s
button)
A.
When it is in the setting model, press
s
button to adjust the setting item to
down once, pr
ess and hold the button can make the decreasing quickly
B.
In the normal model, press the
s
button to read the W
et Bulb T emper
ature
(display Tw).
2.5
SET (Set button)
A.
In the normal mode, press “set” button once to switch the unit of temper
ature
о
С to
о
F .
B.
In the normal mode, press and hold “set” button for 3 seconds, it will
show
alarm on/off(the defaulting setting is off), press
r
or
s
button to
change the low alarm limit setting, pr
ess “set” button again, it will show
alarm
on/off(the defaulting setting is off), press
r
or
s
button to change the
high alarm limit setting, if one value of alarm limit is activ
ated, press “set” but-
ton again can enter the setting for alert item, the defaulting setting is indoor
temperatur
e, press
r
or
s
button can choose Tw
temperatur
e, T d
tempe-
ratur
e and humidity in turn, press “set” button again to exit the setting mode.
C.
Press “mode” button once, when it just sho
w the data of alarm limit, then press
“set” button, it can set the setting for the alarm limit, press
r
or
s
button
once can adjust 0.1 by each, press and hold it for 3 seconds will adjust quic-
kly .
Function specification
1.
T emper
ature and humidity
A.
T emper
ature measuring r
ange: -40 - 80
о
С,
Humidity measuring range: 1%-99 % rH.
B.
T emper
ature Resolution: 0.1
о
С.
C.
Humidity Resolution: 0.1% rH.
D.
T emper
ature and humidity measuring period: 8 seconds.
E.
While the temperatur
e is below -40
о
С, it will show LL.L, like pic.6.
F .
While the temperatur
e is ov
er 80
о
С, it will show HH.H, like pic.5.
G.
Humidity trend indicator: the data is 2% higher than the last time while each
measuring, the arro
w
will show; the data is 2% lo
wer than the last time, it will
show . It w
on’t show the arr
ow
in 1 hour without ov
er 2%.
H.
T emper
ature tr
end indicator: the data is 1 higher than the last time while each
measuring, the arro
w
will show; the data is 1
low
er than the last time, it will
show . It w
on’t show the arr
ow
in 1 hour without ov
er 1
I.
When the temperatur
e or humidity ov
er the setting alarm limit, it will show the
corresponding data with Beep sound and with LED blinking. The sound for
beep will last for at best 60 seconds, twice for each second, press any button
can stop the alarm sound. And once the data is ov
er the alarm limit again, it
will always be with LED blinking indicator
, each 3 seconds once, each time will
light 0.5 seconds.
07853Manual2012:07853Manual0212 07.02.2012 12:51 Page 19
