BRAYER BR4800 - Инструкция по эксплуатации - Страница 6

6

EN

•  is detected, and after the unit was dropped, unplug it 

and apply to the service center.

•  To avoid damages, transport the unit in the original 

package.

•  Keep the unit in a dry cool place out of reach of 

children and disabled persons.

THE UNIT IS INTENDED FOR HOUSEHOLD USE 

ONLY, DO NOT USE THE UNIT FOR COMMERCIAL 

OR LABORATORY PURPOSES.

BEFORE THE FIRST USE

After the unit’s transportation or storage at negative 

temperature, unpack it and wait for at least 3 hours 

before using it.

•  Unpack the unit and remove all the packaging 

materials. 

•  Keep the original package.

•  Read the safety measures and operating 

recommendations.

•  Check the delivery set.

•  Examine the unit for damages, in case of damage do 

not plug it into the mains.

• 

Make sure that specified specifications of power 

supply voltage of the unit correspond to the 

specifications of your mains. When using the unit in 

the mains with 60 Hz frequency, the unit does not 

need any additional settings.

• 

Wipe the fan heater body with a slightly damp cloth 

and then wipe it dry.

USING THE FAN HEATER

• 

Place the fan heater base (1) on a flat, dry and 

steady surface. 

•  Do not place the fan heater on soft surfaces, such as 

carpets with high pile, sofas or beds.

• 

The distance between the front grid of the fan heater 

and the furniture should be at least 0,9 m. 

•  To avoid mains overloading, do not switch on several 

electrical appliances with high power consumption at 

the same time.

•  Insert the power plug into the mains socket.

•  Set the operation mode switch (5) into the necessary 

position:

 -

«0» — the fan heater is off;

 -

«*» — fan mode;

 -

«I» — low power level for small rooms;

 - «II» — high power level for large rooms.

• 

Turn the thermostat control knob (6) clockwise as 

far as it will go; the light indicator (7) will light up. 

When the air temperature in the room reaches the 

desired value, turn the thermostat control knob (6) 

counterclockwise until you hear a distinctive click; in 

this position the thermostat will maintain the set air 

temperature in the room automatically.