Blaupunkt 40FB5000T - Инструкция по эксплуатации - Страница 49

Connecting the network cable (LAN connection) 

You can also establish 
an internet connection 
via WiFi.  

Getting started 

Powering the TV set on and off 

Powering on 

Check that the TV is in standby mode. This means the mains cable must be connected to a 
working mains socket.Then press the power button on the device or the  

   button on the 

remote to turn on the TV. 

Powering off 

To power the TV off, either press  the Power button on the device or press the 

 button on 

the remote control. 

After use 

Cleaning 

Warning:

  Make sure the device is unplugged from the mains power before 

cleaning. Otherwise, there is a risk of electrocution! 

Never spill or spray any type of liquid into the unit.  Only use a clean, dry cloth for cleaning 
the casing. Never use aggressive liquids. When very dirty, use a slightly dampened cloth. 

Clean the screen with a special cleaning cloth for screens. 

Caution:

  when you clean the screen, hold the device steady with one hand 

and carefully clean the screen with the other. Otherwise, the device could tip 
over and get damaged or cause injuries. 

Storage when not in use 

If you do not plan to use the device for an extended period of time, unplug the power cord from 
the socket and remove the batteries from the remote control. Make sure that the  storage 
temperature is between 

15 °C 

to

3

5 °C

 and the relative humidity does not exceed 90%. 

Transport 

If you wish to move the device a short distance, proceed as follows to transport the device: 

1. Disconnect the device from the mains.

2. Remove all cables connected to the device.

12