Telefunken TF-LED40S10T2 - Инструкция по эксплуатации - Страница 8

Operation

8

8

Operation

General operations

Power

•  Connect the plug of the power cord to the 

power supply outlet, the power indicator will 
flash showing that the unit is in standby mode. 
To switch on the unit press the power switch 
on the back of the unit to the ON position. The 
unit will be in standby mode. Press POWER/ 
STANDBY on the RC or unit to switch on the 
unit from standby mode. Press power switch on 
the back of the unit to OFF position to switch off 
the power. When the unit is on, press POWER 
button on the RC to switch the unit to standby.

•  Do not leave your TV in standby mode for 

a long period of time; if you are not going to 
use the unit, disconnect it from power supply.

•  In TV mode the unit will automatically go to 

standby mode if no signal for 5 minutes. 

Operations

•  Press VOL- button repeatedly to decrease 

the volume; press VOL+ button repeatedly to 
increase the volume.

•  Press 

 to mute sound, press this button 

again or increase volume to resume sound.

•  Press RETURN button on the RC to select 

from the present channel and the previously 
displayed channel.

•  Press 16:9 button repeatedly to select a 

screen aspect ratio. Available aspects may 
differ for different signal sources.

•  Select the TV function mode. Press 

CH-/CH+ buttons to select previous or next 
channels; or press number buttons to enter a 
channel number directly.

•  Press P.MODE button repeatedly to cycle 

through the available video picture modes from 
the following types: Standard => Soft => User 
=> Dynamic.

•  Press S.MODE button repeatedly to cycle 

through the available sound modes from the 
following types: Standard => Music => Movie 
=> Sports => User.

•  Press INFO button to display the preset 

TV channel play information.

•  Press F1 button to freeze the picture on 

or off.

•  Press PROGRAM LIST button to scan or 

set program list.

•  Press L/R button in TV mode repeatedly to 

switch between various Nicam sound modes 
(can be unavailable for some channels). This 
function is optional.

Signal sources

Press SOURCE button, then press DOWN/

UP cursor buttons on the RC or CH+/CH- 
buttons on the panel to select a source from 
available source list: DTV => ATV => AV =>  
=> YPbPr => HDMI 1 => HDMI 2 => HDMI 3 
=> VGA => USB. Press OK button on the RC 
to confirm.

Teletext operations (option)

Select a TV channel in order to pick up 

the picture signal of Teletext. Teletext button 
functions are as follows:

TTX: Press this button to enter into TEXT 

mode. Press this button again to enter mixed 
mode. Press the button again to return to the 
channel you are watching.

HOLD: Press this button to stop the move 

to the next page. Press this button again to 
cancel operation.

INDEX: Press this button to go to the index 

page.

LIST: Toggle the list mode.
REVEAL: Press this button to reveal the 

concealed information. Press this button again 
to conceal the information.

Red/Green/Yellow/Blue buttons: Press 

these 4 color buttons to access directly to 
corresponding color page displayed at the 
lower parts of teletext screen.