Telefunken TF-LED32S22T2 - Инструкция по эксплуатации - Страница 8

Operation

8

8

Operation

General operations

Power

•  Connect the plug of the power cord to the 

power supply outlet, the power indicator will 
flash showing that the unit is in standby mode. 
To switch on the unit, press POWER button on 
the panel or on the RC; the indicator will light 
up. Press POWER button again to switch the 
unit to the standby mode. To switch off the unit 
completely, disconnect the power cord plug 
from the power supply outlet.

•  Do not leave your TV in standby mode for 

a long period of time; if you are not going to 
use the unit, disconnect it from power supply.

•  In TV mode the unit will automatically go to 

standby mode if no signal for 5 minutes. In PC 
mode the unit will automatically go to standby 
mode if no signal for 30 seconds.

Operations

•  Press VOL- button repeatedly to decrease 

the volume; press VOL+ button repeatedly to 
increase the volume.

•  Press 

 to mute sound, press this button 

again or increase volume to resume sound.

•  Press AUDIO button in TV mode 

repeatedly to switch between DUAL I/ DUAL II/ 
DUAL I+II/Mono/Stereo sound modes (can be 
unavailable for some channels). In DTV mode 
press the button to switch audio languages.

•  Press repeatedly SOURCE button on the 

unit or on the RC, then press UP/DOWN cursor 
buttons to cycle through the available signal 
source options.

•  Select the TV function mode. Press 

CH-/CH+ buttons to select previous or next 
channels; or press number buttons to enter a 
channel number directly.

•  Press RETURN ( ) button on the RC 

to select from the present channel and the 
previously displayed channel.

•  Press LIST button to display the Channel 

List. Use UP/DOWN to select, CH+/CH- to 
scroll through the channel list.

•  Press FAV button to display the Favourite 

channel list in TV mode (you should setup your 
favourite channels in Program Edit menu).

•  Press INFO button to display the preset 

TV channel play information.

•  Press ZOOM button repeatedly to select 

from a list of supported aspect ratios. The set 
of available aspects can vary depending on the 
current signal source.

•  Press EPG to launch the Electronic 

Program Guide (EPG) in DTV mode.

•  Press TIMESHIFT to enable the Time Shift 

function in DTV mode.

Teletext operations 

(option)

Select a TV channel in order to pick up 

the picture signal of Teletext. Teletext button 
functions are as follows:

TEXT (

): Press this button to enter into 

TEXT mode. Press this button again to enter 
mixed mode. Press the button again to return 
to the channel you are watching.

HOLD (

): Press this button to stop the 

move to the next page. Press this button again 
to cancel operation.

INDEX (

): Press this button to go to the 

index page.

SIZE (

): Press this button to enlarge the 

top part of the page. Press this button again to 
enlarge the bottom part of the page. Press this 
button third time to normal size text page view.

REVEAL (

): Press this button to reveal the 

cancelled information. Press this button again 
to cancel the information.

SUBPAGE (

): Press this button to select 

sub-page. Input the number of sub-page and 
use numeric buttons in the format 0001 for 
sub page 1. The teletext will search for the sub 
page. Press SUBPAGE button again to exit the 
subpage mode.

CANCEL (

): Press this button to cancel 

the teletext; press again to show the teletext.

Red/Green/Yellow/Blue buttons: Press 

these 4 color buttons to access directly to 
corresponding color page displayed at the 
lower parts of teletext screen.