Telefunken TF-LED29S21 - Инструкция по эксплуатации - Страница 4

Before you start

4

4

Before you start

cups, medicines or any other liquid 

containing objects on the unit. Spillages may 
cause fire, electric shock or breakdown.

•  Do not install the unit in locations with 

a strong magnetic or current field as it may 
cause malfunction. Picture deterioration due to 
electromagnetic radiation in this environment is 
also possible.

•  Do not place any fire source such as 

candles close or on this product. If tipped over 
or fallen down, it may cause damage or fire.

•  Do not place the unit into closed space 

of TV for better ventilation; it can reduce the 
product lifetime. Keep a space at least 10 cm 
at above, left, and right of the TV.

•  Please place all the signal cords behind 

the rear panel.

•  Do not overexert or touch the panel when 

carrying the product. Do not transport the LED 
TV with the display faced up or down.

•  Do not transport the unit with the power 

cord or the connection cable connected as it 
may damage the power cord, connection cable 
or connection terminal which may cause fire, 
electric shock or breakdown.

•  Make sure that 2 persons or more carry 

the device heavier than 18 kg. Dropping or 
tipping over the device may damage it.

•  The temperature of the product’s body 

becomes a little higher after a long period 
of use. This indicates that heat exchange 
is in normal working mode, thus please do 
not let children or anyone who is sensitive to 
temperature touch the unit.

All images provided herein are schematic 

drawings of real objects and may differ 
from their real life images.

Installation

Wall mounting

For wall mounting the back panel of this 

unit is equipped with 4 screw holes (4 mm 
diameter, 135 mm horizontal spread distance 
x 100 mm vertical spread distance). A VESA 
wall-mount bracket should be used for wall 
mounting (the bracket is not included and 
should be acquired separately). Manufacturer 
is not responsible for improper mounting 
resulting in damage of the unit.

Stand installation

Place the LED TV on a solid flat surface. 

Use soft material to place over the front screen 
to avoid any damage. First, use the fixing 
elements to assemble a stand as shown below. 
Fasten with 4 screws. Then align the stand 
with the slots in the lower part of the unit and 
fix the two parts by 4 screws.

Wall or ceiling mounting implements 

must be durable and sufficient enough to 
support the weight of the unit.