Telefunken TF-LED24S15 - Инструкция по эксплуатации - Страница 4

Before you start

4

4

Before you start

Installation

Wall mounting

For wall mounting the back panel of this unit 

is equipped with 2 screw holes. A wall-mount 
bracket should be used for wall mounting (the 
bracket is not included and should be acquired 
separately). Manufacturer is not responsible 
for improper mounting resulting in damage of 
the unit.

Stand installation

Place the LED TV on a solid flat surface. 

Use soft material to place over the front screen 
to avoid any damage. Then put the slits of the 
stand onto the fixing elements in the lower 
part of the unit and fix the two parts by the two 
supplied screws as shown below:

medicine and any container with water on 

this product. If the liquid is spilt, it may cause 
the fire, electric shock or breakdown.

•  Do not install it at the place on the strong 

magnetic field or current field. It may cause 
break down. This equipment may be observed 
deterioration of the picture by electromagnetic 
radiation in electromagnetic environment.

•  Fasten the wheel of the product or shelf 

with wheels when installing this product. If it 
moves or is tipped over, it may be damaged.

•  Do not place any fire source such as 

candlelight close to this product or place it on 
this product. If it is tipped over or fallen down, it 
may cause damage or fire.

•  Do not place the unit into closed space 

of TV for better ventilation; it can reduce the 
product lifetime. Keep a space at least 10 cm 
at above, left and right of the TV.

•  Please place all the signal cords behind of 

rear panel.

•  Do not overexert or touch the panel when 

you convey the product. Do not transfer the 
LED TV up or down display direction.

•  Do not transport it with the power cord 

or the connection cable connected. If you 
move this product with the power cord or the 
connection cable connected, the damaged 
power cord, connection cable or connection 
terminal may cause the fire, the electric shock 
or breakdown.

•  2 persons or more shall transport the 

device, which is heavier than 18 kg. If you drop 
or tip over the device, it can be damaged.

•  The temperature of the product’s body 

becomes a little higher after a long period use. 
This phenomenon indicates that heat exchange 
in normal working mode, thus please do not 
let children or anyone who is sensitive of 
temperature to touch.

All images provided herein are schematic 

drawings and may differ from of real objects.

Screws