Telefunken TF-LED24S13 - Инструкция по эксплуатации - Страница 8

Operation

8

8

Operation

Changing the battery

1.  Remove the battery compartment cover 

on the back of the RC.

2.  Insert two AAA batteries into the battery 

compartment making sure that the correct 
polarity is observed.

3.  Put the cover back.
•  The RC should be pointed at remote 

sensor within 8 meters and within 30 degrees 
at the left or the right side.

•  Take the battery out of the RC if it is not 

used for a long time.

•  Do not mix new and used batteries or 

different types of batteries. Weak batteries can 
leak and severely damage the RC.

•  Do not expose the RC to shock, liquids, 

and do not place it in an area with high 
humidity.

General operations

•  Press and hold the FUNCTION button on 

the unit or POWER the RC to switch on the 
power, the indication on the unit will light up. 
Press POWER button again to switch off the 
power, and the light will be in red color.

•  Press VOL- button repeatedly to decrease 

the volume; press VOL+ button repeatedly to 
increase the volume.

•  Press RETURN button on the RC to select 

from the present channel and the previously 
displayed channel.

•  Press MUTE button to cut off sound, press 

this button again or adjust volume to resume 
sound.

•  Press PR-/PR+ buttons to select previous 

or next channels; or press number buttons to 
enter a channel number directly.

•  Press P.M. button repeatedly to cycle 

through the available video picture modes 
from the following types: Normal => Soft => 
Personal => Bright.

•  Press S.M. button repeatedly to cycle 

through the available sound modes from the 
following types: Standard => Music => Film => 
News => Personal.

Press NICAM button in TV mode repeatedly 

to switch between Stereo, Mono, Dual I, 
Dual I+II and Dual II sound modes (can be 
unavailable for some channels).

•  Press FREEZE button to freeze the picture 

on or off.

•  Press FAV. button to show the favourite 

channel list. Press UP/DOWN to select next or 
previous favorite channel. Press OK to confirm.

Signal sources

Press SOURCE button, then press DOWN/

UP cursor buttons on the RC or PR UP/PR 
DOWN buttons on the panel to select a source 
from available source list: DTV - ATV - AV -  PC 
- HDMI - USB. Press OK button on the RC or 
FUNCTION button on the panel to confirm.

TELETEXT operations 

(option)

•  Select the TV source mode. Then press 

PR-/PR+ buttons to select TV channel in order 
to pick up the picture signal of Teletext.

•  Press PR-/PR+ buttons to select the 

previous page or the next page.

•  Teletext button functions are as follows:
HOLD: Press this button to stop the move 

to the next page. Press this button again to 
cancel operation.

INDEX: Press this button to go to the index 

page.

CANCEL: Press this button to cancel the 

teletext; press again to show the teletext.

REVEAL: Press this button to reveal the 

concealed information. Press this button again 
to conceal the information.

SUBPAGE: Press this button to select sub 

page, then press Red/Green buttons to select 
the desired subpage.

MIX: Press this button to mix the teletext 

and current TV signal image (transparent 
background).

RED/GREEN/YELLOW/BLUE buttons: 

Press these 4 color buttons to access directly 
to corresponding color page displayed at the 
lower parts of teletext screen.