TCL Q50C725 - Инструкция по эксплуатации - Страница 8

8

Getting Started

TV Buttons

- Power button 

If the batteries in your remote control are run down, you can use the button(s) on your TV set. 

There is only one   button on the TV set. It may work just as Power on/Standby button, or as a multi-function 

controller.

You can turn on the TV by pressing the   button at the bottom left of the TV back case. 
While the TV is on, press the   button to display the multi-function menu. More information about how to use the 

multi-function menu, please refer to the figure below. 

CH+

CH-

Volume+

Source

OK

Volume-

Standby

Tips: Short click to change, long click to select.

•  Press to move the highlight to the next function selection
• 

Press and hold the button for more than 2 seconds to confirm your selection.

Note:

You can follow the on-screen guide to operate.

Figures and illustrations are provided for reference only and may vary depending on the model.

- MIC button 

The MIC button is located next to the power button. If you want to use the feature of hands-free TV voice control, 

turn on this switch.

ON

OFF

Initial Setup

The first time you switch the set on, the 

Welcome

 wizard appears, which guides you through the initial setup 

process. Follow the on-screen instructions to finish the initial setup process such as selecting the language, 

pairing your remote, connecting to the network, and more. During each step, either make a choice or skip the 

step. If you skip a step, you can perform the setup later from the settings menu. 

Note:

When you pair your remote, keep the remote control and TV in 1 meter, and follow the on-screen guide for 

pairing. 

Mic button. If you skip remote pairing, you will be

prompted to pair the remote with the TV again when you use the Mic button for the