Sharp LC-40CFG6352E - Инструкция по эксплуатации - Страница 14

EN



What is included in the box

Supply of this TV includes following parts:

• 1x 

TV

• 1x 

RF 

cable

• 

1x Remote control

• 

1x TV stand installation packet

• 

2x AAA batteries

• 

1x User guide

• 

1x mini component adapter 
cable

• 

1x mini composite adapter 
cable



Attaching the Stand

Please follow the instructions on last page of this user manual.



Wall mounting the TV

1. 

Remove the four screws that are supplied in the wall mounting holes.

2. 

The wall mount can now be easily attached to the mounting holes on 
the rear of the TV. 

3. 

Install the wall mounting bracket to the television as advised by the 

bracket manufacturer.



Getting started - initial set up

1. 

Using the RF cable supplied, connect the TV to the TV Aerial wall 
socket.

2. 

For connecting to the Internet with a wired connection connect a 
Cat 5/Ethernet cable (not included) from the TV to your broadband 
modem/router.

3. 

Insert the batteries supplied into the Remote control.

Connect the power cable to the Electrical outlet. The TV should power 

on automatically once the TV is connected to the mains.

1) If the TV turns on automatically

 and the fi rst time installation 

screen appears but the TV does not react to remote control, press 
and hold the YELLOW and BLUE buttons on the remote control for a 
few seconds. The power light will blink 5 times to confi rm the TV and 
remote control are paired.

2) If the TV does not automatically turn on 

you will need to turn 

the TV on using the standby button on the TV set (not the remote 
control), once switched on, press the standby button on the TV set 
once, this will prompt the ‘pairing menu’ to appear, scroll through and 
highlight ‘Pair your remote’ by pressing the CH+/CH- TV button (scroll 
up/down function in the menu) then press the TV set’s standby button 
(OK function in the menu) to confi rm your selection, then with the 
remote control, press and hold the YELLOW and BLUE buttons for a 
few seconds, the power light will blink 5 times to confi rm the TV and 
remote control are paired.

4. 

You will be now welcomed with the 

First Time Installation

 screen.

If it does not appear, on the remote control, please press [MENU] then 
8-8-8-8 and the menu will appear.
If you wish to make changes to any of the default settings, use the 
scroll 

▲/▼/◄/►

 buttons. To exit this menu at anytime, press [EXIT ] 

button.

5.  Please set desired settings in First Time Installation screen.

STEP 1

 - Set the TV Menu language.

STEP 2

 - set your country

STEP 3

 - Set type of network connection. If you wish to skip this step 

and connect TV to network later, please choose Skip Network Setting

STEP 4

 - Select the location of TV. For home use, please select Home. 

For shop demonstration mode, set Store.

STEP 5

 - choose if your TV has stand, or if it is mounted on the wall. TV 

will set optimal audio settings for selected option.

STEP 6

 - choose input source which you want to use. If you have 

connected RF cable directly to TV, choose DTV. If you have satellite 
directly connected to your TV, choose DVB-S*. In case you are using 
set-top-box, please pick correct input to which it is connected.

6. 

If you selected in last step DTV or DVB-S2, you will be asked if you 
want to tune channels. If you choose “No”, you can tune channels later 
from SETTINGS/CHANNEL menu. If you choose “Yes”, tuning menu 
will appear.

Digital TV (DTV) tuning:

 In DVB Antenna, please choose which type 

of signal you have. Terrestrial (DVB-T ) or Cable (DVB-C). Then enter 
Auto tuning and set your desired settings. Again choose Auto tuning 
to start tuning of channels.

Satellite (DVB-S2) tuning:

 Enter Auto Tuning and enter Satellite. Here 

you can choose between the various satellites. Select satellite which 
you wish to tune by pressing OK button on remote control. Then 
return to previous menu by pressing BACK button on your remote 
control and choose Auto tuning to start tuning of channels.

NOTE

: To shorten tuning time of satellite channels, some countries 

have preinstalled channel list for most popular satellite in that region. 
If this is the case for your selected country, you will be asked if you 
wish to load preinstalled channel list. If you choose “Yes”, satellite 
channel list will be imported to your TV within few seconds.

TIP: 

If you are missing channels, the reason for this is likely to be signal 

strength, you should consider connecting signal booster and re-tuning the TV.



Remote control

Radio controlled remote control - No more aiming in the TV direction!
Refer to remote control picture on the second page of this user 
manual.

1. 

 STANDBY –

 Switch on TV when in standby or vice versa.

2. NETFLIX 

–

 Displays NETFLIX menu.

3. 

 MUTE – 

Mute the sound or vice versa.

4.  0 – 9 – 

to select a TV channel directly.

5. YouTube 

–

 Displays YouTube application.

6. NET+ 

–

 Displays AQUOS NET+ menu.

7. SOURCE 

– 

To display the input/source menu.

8.  TV GUIDE – 

Opens the 7 Day TV Guide (Digital mode).

9. 

 –

 To return to the previous channel viewed.

10. DTV –

 Switch to digital TV source.

11. VOL 

▲/▼

 –

 To increase/decrease the sound level.

12. FAV –

 To display favourites menu.

13. INFO – 

Press once for now/next channel information. Press twice for 

programme information about current programme.

14. CH

 ▲/▼

 – 

To increase or decrease the channel being watched.

15. SUBTITLE – 

To switch the dialogue at the bottom of the screen (on/

off ).

16. TELETEXT – 

Teletext mode - To enter Teletext

17. MENU –

 To display OSD menu.

18. BACK –

 Back to previous menu.

19. EXIT – 

To exit all menus.

20. (

▲/▼/◄/►

/ OK) – 

Allows you to navigate the on-screen menus 

and adjust the system settings to your preference. Press

▲

to change 

picture mode during watching TV. Press

▼

to change sound mode 

during watching TV.

21. 

 –

 To play in fast rewind mode.

22. 

 –

 To play in fast forward mode.

23. 

 –

 To play/pause

24. Rec

1 

–

 PVR Record

25. 

 –

 To restart the current chapter

26. 

 –

 To advance forward to the next chapter