Samsung UE48J5000AUXRU - Инструкция по эксплуатации - Страница 49

English - 15

English

Issues

Solutions and Explanations

There are difficulties 
assembling the stand base.

•

Make sure the TV is placed on a flat surface. If you cannot remove the screws from 
the TV, please use a magnetized screw driver.

The 

Broadcasting

 menu is 

grey out (unavailable).

•

The 

Broadcasting

 menu is only available when the TV source is selected.

Your settings are lost after 
5 minutes or every time the 
TV is turned off.

•

If the TV is in the 

Store Demo

 mode, it will reset audio and picture settings every 5 

minutes. If you want to change the settings from 

Store Demo

 mode to 

Home Use

, 

press the 

SOURCE

 button to select 

TV

 mode, and go to 

MENU

→

Support

→

Use 

Mode

. 

You have intermittent loss 
of audio or video.

•

Check the cable connections and reconnect them. 

•

Loss of audio or video can be caused by using overly rigid or thick cables. Make sure 
the cables are flexible enough for long term use. If mounting the TV to the wall, we 
recommend using cables with 90 degree connectors.

You see small particles 
when you look closely at 
the edge of the frame of 
the TV.

•

This is part of the product’s design and is not a defect.

The 

PIP

 menu is not 

available.

•

PIP

 functionality is only available when you are using a HDMI or components source.

You turned the TV off 45 
minutes ago, and it turned 
on again.

•

It is normal. The TV operates the OTA (Over The Aerial) function itself to upgrade 
firmware downloaded whilst your watching TV.

The message “

Scrambled 

Signal

” or “

Weak or No 

Signal

” appears.

•

If you are using a CAM CARD (CI/CI+), check that it is installed into the common 
interface slot.

•

If there is still a problem, pull the CAM CARD out of the TV and insert it into the slot 
again.

There are recurrent picture/
sound issues.

•

Check and change the signal/source.

A reaction may occur 
between the rubber 
cushion pads on the base 
stand and the top finish of 
some furniture.

•

To prevent this, use felt pads on any surface of the TV that comes in direct contact 
with furniture.

The message “

This file 

may not be playable 
properly.

” appears.

•

This may appear because of high bit rate of content. Content generally will play but 
could experience some playability issue.

✎

You can keep your TV in optimum operating condition by upgrading to the latest firmware (www.samsung.com 

→

support) by USB.

✎

This TFT LED panel uses a panel consisting of sub pixels which require sophisticated technology to produce. 
However, there may be a few bright or dark pixels on the screen. These pixels will have no impact on the 
performance of the product.

Recommendation - EU Only

•

Hereby, Samsung Electronics, declares that this LED TV is in compliance with the essential requirements and other 
relevant provisions of Directive 1999/5/EC.

•

This equipment may be operated in all EU countries.

•

The official Declaration of Conformity may be found at http://www.samsung.com, go to Support > Search Product 
Support and enter the model name.

[UJ5000-40-48-RU]BN68-07425A-00L04.indb   15

2015-09-17   오후 5:12:56