Телевизоры кинескопные Sony KV-SR292M99K - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.

28
Additional Information
x
Troubleshooting
If you find any problem while viewing your TV, you can either use the “Factory
Settings” function or check the Troubleshooting guide below. If the problem
persists, contact your Sony dealer.
“Factory Settings” function
Press the WEGA GATE button. Choose “Settings” and go to “Setup” (
) menu.
From “Setup” menu, select “Factory Settings”. Then select “Yes” and press
.
Your TV will go blank for a few seconds, then the “Initial Setup” menu will
appear. Your TV will be set to factory settings, but certain problems may be
solved.
Snowy picture,
noisy sound
Distorted picture,
noisy sound
Good picture,
noisy sound
No picture,
no sound
Good picture,
no sound
No sound or
inappropriate
sound
Dotted lines or
stripes
Double images or
“ghosts”
Symptom
Solutions
• Check the antenna cable and connection on the TV, VCR and at the wall
(see page 26).
• Check the antenna setup. Contact a Sony dealer for advice.
• Display the “Channel Setup” menu and select “Manual Program” to preset
the channel again (see page 23).
• Display the “Channel Setup” menu and set the “Signal Booster” to “Auto”
from “Manual Program” (see page 23).
• Try using an external booster.
• Turn off or disconnect the external booster if it is in use.
• Display the “Channel Setup” menu and set the “Signal Booster” to “Off”
from “Manual Program”(see page 23).
• Display the “Channel Setup” menu and select the appropriate
“TV System” from “Manual Program” (see page 23).
• PIP sound is selected when PIP is displayed. Press
or
B
(see page 12).
• Check the power cord, antenna and VCR connections (see page 26).
• Press
?/1
(power) to turn on the TV (see page 9).
• Press
!
(main power) on the TV to turn off the TV for about five seconds,
then turn it on again (see page 8).
• Press
2
+ to increase the volume level (see page 9).
• Press
to cancel the muting (see page 9).
• PIP sound is selected when PIP is displayed. Press
or
B
(see page 12).
• Display the WEGA GATE menu and set the “Audio Input Fix” to “Off”
from “Party Mode Setup” (see page 13).
• Do not use a hair dryer or other equipment near the TV.
• Check the antenna setup. Contact a Sony dealer for advice.
• Use a highly directional antenna.
• Use the fine tuning (“Fine”) function (see page 23).
• Check the antenna setup. Contact a Sony dealer for advice.
• Turn off or disconnect the external booster if it is in use.
Содержание
- 32 Настройка с помощью меню; Знакомство с навигатором; Содержание; Установка; Настройка ТВ; Элементы управления
- 33 Безопасная установка телевизора; или
- 34 Перед эксплуатацией
- 37 Передняя и задняя панели
- 38 Использование пульта ДУ и базовые
- 39 продолжение
- 40 Более сложные функции; Bыбор режима звучания; Bыбор режима изображения
- 44 При приеме программы NICAM; При приеме программы A2
- 45 Teлeтeкст
- 46 Использование WEGA GATE
- 47 Меню “Установки”; “Изображение”
- 48 Изменение параметров “Изображение”
- 49 Изменение параметров “Звук”; Настройка параметров “Настройка звука” в режиме “Индивид.”
- 50 Изменение настройки функции
- 51 Изменение установок “Настройка каналов”
- 52 Сохранение телеканалов вручную
- 53 Изменение установок “Установка”
- 54 Действие 1; Дополнительная информация
- 55 Подключение к разъему видео/aудио выхода (
- 57 Устранение неисправностей; Функция “Заводские настр.”
- 59 ехнические характеристики












