Телевизоры кинескопные Elenberg 29F08 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
39
TROUBLESHOOTING
If you have any problem, check the countermeasures for each symp-
tom listed below. The following symptoms may have been caused by
inappropriate adjustments rather than actual malfunction of the unit.
If the trouble persists, contact the service centre.
SYMPTOMS
SYMPTOMS
POSSIBLE SOLUTIONS
POSSIBLE SOLUTIONS
Colour stripe (uneven)
Unplug the TV for 20 minutes, then
plug it in and try again.
Ghost or disorders in teletext
This maybe caused by re
fl
ection
from tell buildings or high moun-
tains, raise the antenna maybe
improve the picture quality
No power
Please check if the power cord is
plugged in. Remove the power cord
and plug it in after 60 seconds and
try again.
No picture
Please check the antenna connec-
tion. Station may experience prob-
lems, please tune to another station.
Please adjust the settings of con-
trast and brightness.
Good picture but no sound
Please increase the volume. Please
check TV is in the mute mode,
press the MUTE button on the re-
mote control or VOL buttons.
Good sound but abnormal colour or
no any picture
Please adjust the settings of con-
trast, brightness and colour systern
Snowy picture and noise
Please check the antenna connection
A white line across the screen
Turn off your TV immediately and
call for the service technician
No remote operation
Batteries of remote control may
have exhausted, if necessary, please
change the batteries. Clean the re-
mote control lens
