Konftel Ego - Инструкция по эксплуатации - Страница 10

8

The Konftel Ego can be connected to a mobile phone, tablet and computer via Bluetooth. 
We are using a mobile phone in these examples. Bluetooth must be enabled in the mobile 
phone's settings.
Audio can be transmitted in two different ways via Bluetooth. One is two-way and is 
optimised for speech. The other (A2DP) has higher audio bandwidth, is one-way and is 
optimised for music. The Konftel Ego supports both of these.



 OmniSound

®

 performs over the full audio bandwidth (50–7,000 Hz). However, limitations 

in the telecommunications networks and in Bluetooth technology reduce the bandwidth 
somewhat and the sound is compressed. This has an effect on the sound quality.

PAIRING AND CONNECTING

Two devices have to be paired before they can communicate with Bluetooth. You do this in 
different ways depending on whether your telephone supports simplified pairing via NFC 
(near-field communications) or not. 
A maximum of eight devices can be paired with the Konftel Ego. If another device is then paired, 
the oldest pairing information is deleted. It is also possible to delete all pairings, see page 12.

Pairing and connecting with NFC



  NFC must be enabled on your mobile phone and the screen unlocked.



  Hold the mobile phone next to the NFC symbol   on the Konftel Ego.



  You might need to move the phone closer then further away from the Konftel Ego to 

make contact via NFC. The range is only about one centimetre.

The mobile phone and the Konftel Ego are paired and connected.
The 

 icon is displayed on the Konftel Ego and the LEDs light up blue.

Pairing without NFC



  Turn Bluetooth on in your mobile phone.

This normally makes the phone visible to other Bluetooth devices and even starts a search on 

some phones.



 Hold   down for two seconds on the Konftel Ego.

This makes the Konftel Ego visible to other Bluetooth devices.  

The 

 icon is displayed and the LEDs flash blue.



  Start a search on your mobile phone.



  Select the Konftel Ego from the list of devices found and select pairing. (It may take a 

while for the devices to find one another.)

The devices are paired and usually automatically connect to one another. 
The 

 icon is displayed on the Konftel Ego and the LEDs light up blue.



  After 60 seconds in pairing mode, the Konftel Ego returns to normal mode even if 

pairing has not been established. 

USING WITH A BLUETOOTH DEVICE